- Patented sensor technology.
- Measures in inches and feet.
- Accurate to 1/10 of a degree.
- Set a beep for any desired angle.
- 9V battery included.
Product Description
-------------------
M-D Building Products 92288 SmartTool 24-Inch Digital Level,
Yellow, Gen2
.com
----
Welcome to the versatile world of SmartTool. Most levels only
give you information at level (0 degrees) and plumb (90 degrees)
using bubbles you have to work to center visually between two
lines. You can do that with SmartTool, too, but the SmartTool
also lets you measure digitally, electronically, and with an
actual number, at every angle, all 360 degrees of a complete
circle. So installing a deck, stair rail, extending a roof or
determining how much an old floor has sagged is simpler, less
time consuming, and more accurate.
SmartTool is simple to use. Just press the on/off button and
SmartTool will show you the angle of any surface with
decimal-point accuracy. The display even flips over with the
level so SmartTool always reads right side up And it shuts off
automatically after 6 minutes when it's not being used, all this
from a standard, 9-volt battery. And, SmartTool can take abuse
other levels can't, because its components are made of high
strength materials and you can reset it to factory accuracy with
the touch of a button.
Many versatile options
If you can imagine times you'd like to have both a small digital
torpedo level and a longer level, the SmartTool Module fills the
need. The SmartTool Module can be used as a stand alone level or
it can be placed in the optional American I-beam level in lengths
of 24 inches, 48 inches or 96 inches. M-D's top-quality red
aluminum I-beam levels have been assured of excellence among
construction professionals for more than three-quarters of a
century. Easily attached or removed using only a screwdriver or
coin, the versatility of this product can be appreciated in
almost any application. The simple, SmartTool patented field
calibration procedure can be performed using one button, any
reasonably level surface, and just a couple of minutes. When used
with the optional magnetic bracket, the SmartTool Module will
stay on saw blades, metal pipes, buildings, machinery or anything
made of iron or steel allowing hands free measurement.
Simple to use
SmartTool permits you to find level and plumb in two ways. For
quick references, use the sensitive bubble vials. For highly
precise work, use the digital display on the Sensor Module. It
provides accuracy to 1/10 of a degree. But the real advantage of
the SmartTool is that it also reads all the other angles bubble
vials don't. So when you are not dealing with level or plumb,
SmartTool quickly tells what the angle is and what the angle
needs to be. And only SmartTool allows you to measure angles
three different ways: degrees, percent slope, and pitch (rise
over run).
Read in Degrees
Set saw blade angles to a fraction of degree accuracy with
SmartTool. Assure there is no gap when you join 2 cuts together
with .1 degree accuracy. You can easily duplicate a stair angle
for setting handrails and never again will you be measuring top
and bottom to make sure stair treads and rails are parallel.
Percent Slope and Pitch
In the percent slope mode the SmartTool allows you to read
angles to meet requirements for sewer connections, ADA ramps, and
grading. And showing compliance is merely a matter of pointing to
the display. SmartTool also gives you roof pitch readings -- in
inches of rise per foot of run -- right on the display. No
two-handed measurements, no conversion calculations, and no
mistakes.
Listen and Level Audio Feature
Have tasks where you really can't see the SmartTool but need
instant feedback? Then turn on the audio beeper. When turned on
with a single button, SmartTool lets you hear when your task is
at level or plumb. This can be great when shimming projects,
leveling buildings, pool tables or other projects where you need
immediate feedback but are not in a position to see the display.
This can leave your hands free to adjust, nail, or screw the
project in place when you hear the beep telling you it is where
you want it.
Hold
The hold button makes it easy to measure in areas where the
digital display is not visible. Take the measurement, push the
hold button, and then bring the SmartTool in front of you to see
your reading.
P.when('A').execute(function(A) {
A.on('a:expander:toggle_description:toggle:collapse',
function(data) {
window.scroll(0, data.expander.$expander[0].offsetTop-100);
});
});
From the Manufacturer
---------------------
SmartTool electronic level all ready to go in a 2 ft. long
aluminum frame. Only SmartTool electronic level can measure all
angles in a 3600 range. Installing a deck, stair rail, extending
a roof, or determining how much an old floor has sagged is
simpler and less time consuming. The display even flips over with
the level, and it shuts off automatically after 5 minutes when it
is not being used, all this from a standard, 9-volt battery (not
included). Features: angle accuracy to 1/10 of a degree, the mode
button lets you see angles in three ways-degrees, percent slope
or pitch (inches of rise per foot of run), and Listen & Level
ideal for poorly lit areas. Also allows hands-free operation as
the audible tone alerts you when tool reaches level or plumb.
Please note that the module cannot be removed from the rail.
See more ( javascript:void(0) )