🚗 Seal the Deal: Drive Smoothly Again!
The Edelmann 8906 Steering Pump Seal Kit is a comprehensive solution for resealing your power steering pump. It includes all necessary components such as O-rings, seals, and gaskets, designed to meet or exceed original equipment specifications. This affordable kit allows you to eliminate leaks and restore functionality without the need for a costly pump replacement, complete with easy-to-follow instructions for installation.
S**S
Ordered for my brothers Honda CR-V and he says he no longer has to top up with oil everyday.
Ordered for my brother. He has a Honda CRV, older type and now he doesn't have to top up with oil everyday. Its working pretty well so far.
S**E
Complete seal kit for BB6.
Worked great, replaced all the seals on my 1997 prelude power steering pump with this kit. 2 months later and not a drop of fluid leaking. Easy install also. Had 2 o-rings left over, but that's because I am sure this kit is made for multiple applications.
C**H
Quality product
I got the rebuild kit and everything in it looked quality and up to OE standards, I elected to return my kit though because as it got cold my pump started to get noisy, which to me makes me think that there’s enough wear on the fins inside the pump that I might as well replace it. If not for that I would of for sure rebuilt it. AS A CAUTION TO OTHERS. If your pump is noisy a rebuild kit will not fix that, it’s better to replace your pump.
G**O
Original one had 200k miles and though it worked fine it was leaking so decided to rebuild it (replace ...
Bought this for my 2001 Honda Accord 4 cylinder engine (F23A4) with 200k miles. Original one had 200k miles and though it worked fine it was leaking so decided to rebuild it (replace o-ring and bearing gasket).Pros: Seals seem to match the ones I was replacing (kit had an extra small o-ring). Pump was relatively easy to remove from the vehicle and take apart though pay close attention when you dissemble it (especially the inner pumps as their are small "vanes" that will fall out and a couple of key components that need to be assembled in the correct order. You will need to bleed the system after re-installation. Do this by jacking the front wheels off the ground and while the engine running turn the steering wheel all the way to the left and right couple of times.Cons: After the rebuild no more leaks BUT the unit makes a growling sound. First thought there is still air in the system but after 2 weeks of driving the sound persists. It still driveable but annoying. I might try and tear down the unit and reassemble again.
T**W
Great price and fast delivery 🚚
Used this set to rebuild my power steering pump and it was a easy install and fast
P**T
Easy and cheap fix for a leaky pump!
My 01 Honda Accord had started to leak a bit. Not a lot but constant seep from several of the seals. The pump still worked fine and was silent. With a rebuilt pump costing over $100 I found this kit and gave it a try. I carefully took apart the pump and cleaned everything. Replaced all the seals. Carefully reassembled the pump, and serviced with new Honda fluid. Pump is completely dry, works great, and is silent. Highly recommended!
H**.
Great Product and good value - Thank you!
Great Product and good value - Thank you!
S**Y
Rebuilt my 1999 Acura Integra power steering pump easy! The kit provided every seal and basic written ...
Rebuilt my 1999 Acura Integra power steering pump easy! The kit provided every seal and basic written rebuild instructions.You need a vice, impact drill (to remove the pully), a mini sledge, and sockets and basic hand tools. I also used steel wool, degreaser, and metal polish to pretty up the pump and anti seize for the bolts and synthetic grease for the bearing housing.
Trustpilot
1 week ago
1 day ago
