My arcade power supply is 16a 110w 110/220v. someone said they used this for 1up arcade so guessing this will work?

15 Amps must be the DC output. 110W @ 110v is 1 Amp AC input. This will work well. If that is all that is connected you should change the fuse to the rating recommended for the power supply (3 amps maybe).

does the light on the toggle switch light up for 120v? I've heard thats a problem with others, that the light is 250v so it doesn't work with 120v

Mine works just fine at 120 volts.

This comes with 18 ga wires. My project requires 14 ga so i plan to replace the wires. But is the internal wiring of this switch compatible?

You would need to research if 15amp 250 volt should use 14ga wiring. I believe the internals are just plate metal with soldered connections and not wiring. Logic would say if you are running less than 15 amperage and less than 250 volts, you should be fine. Most American stansard outlets are 110-115 volt, but what amperage are you pulling. You'll have to answer that. Again....this is just a best question with information given. Good luck.

Can a higher amp fuse be used in place of the included 5 amp fuse? I would like to use a 6 or 8 amp fuse.

The switch itself is rated for 10 amps @ 125 VAC or 6 amps @ 250VAC. That is why they included a 5 amp fuse. So depending on your input AC voltage no higher than a 9 amp fuse on 125 VAC for safety factor. If you push the rocker switch out of its mount, you will see its ratings molded on the side. If this were just a power socket with no switch then it could handle 15 amps. The switch is the deciding factor here.

Desertcart Logo

Deliver to Saint Kitts and Nevis

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

⚡ Switch on safety, switch up your setup!

PLUG PLAY READY - Pre-installed 18 AWG wiring and IEC320 C14 inlet for instant setup.
COMPACT VERSATILE - Slim 5.8 x 4.8 x 3.4 cm design fits seamlessly into any DIY or professional setup.
VISUAL POWER CONTROL - Illuminated rocker switch clearly shows ON/OFF status at a glance.
POWER WITH CONFIDENCE - Built-in 10A fuse ensures safe, uninterrupted current flow.
TRUSTED COMPATIBILITY - Perfect for 3D printers, computers, and home appliances—power your projects with ease.

The 3Dman 15A 250V Rocker Switch Module combines a robust 10A fuse with a standard IEC320 C14 3-pin inlet and an illuminated rocker switch, delivering safe, convenient power control. Pre-wired with 18 AWG cables and compactly designed, it’s ideal for 3D printers, computers, and DIY projects requiring reliable power distribution and clear status indication.

Reviews

R**7

Rocker Switch On/Off Power Socket Inlet Module Plug

This rocker socket switch, has served me well on my homemade projects. Very well made. I recommend this product to anyone who needs one.

5.12.2024

V**C

Convenient Pre-Wired Socket for Easy Installation

I bought this socket for my arcade cabinet. Unlike other products where I have to connect wires between the switch and power myself, this one already has the wiring set up inside the plastic component, which is very convenient. I only need to connect the wires for the power, making installation much easier. However, the included wires couldn’t be directly connected to my outlet, so I used pre-made ones instead. The labels "L" and "N" indicate which side is Load and Neutral, while Earth is represented by a symbol.

7.03.2025

C**E

Works as intended

Works great. Ordered for a Costway SureFit treadmill. The power switch went out. Ordered this one. Hooked up easily and powered on as it should.

20.08.2025

A**R

Loose conectors, terminals backwards

The connection wires had very loose connectors. I had to take them off and squeeze them with pliers, then they stayed on tight.The terminals are not labeled. The pictures seem to imply that the top connection is hot, then neutral, then the ground separated by some distance. It comes wired that way too. The hot is actually the middle one, and the neutral the top. I tested w a voltmeter to make sure, then I switched the red and blue wires so I wouldn't forget which was which.Otherwise the switch seems to operate fine, and the power cord plugs in nice and snug.

11.10.2024

K**R

All Good. Check the polarity; that's on you.

It's fine. I have "New Version" shown in picture, The switch opens and closes both the neutral and line wires, leaving the ground alone. Check the wires so you know which is neutral.Mine was wired so that the blue wire (middle terminal on inside) was wired to the hot/line side of my normal NEMA 5-15 to C14 cord. I recommend checking yours carefully with a multimeter.

24.07.2025

T**S

Ultrasonic Cleaner Replacement Switch Receptacle

This was a perfect fit replacement for ultrasonic cleaner part number PS-80A.

16.07.2025

N**N

Works great

Worked as expected with no issues.

21.01.2025

A**N

Great for guitar pedal board

Great for my guitar pedal board. Easy to wire.

28.04.2025

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.