CAMVATECamera Clamp Mount for DSLR Camera Led Video Light and Binoculars Holder Mount - 1122

Needed a desktop clamp for my camera to shoot stop mo stuff.I was skeptical about how well the single knob tension for two points would hold.As I had hoped it works perfectly, and the simplicity of the single knob tension is brilliant.It's tight enough for my desk and what I need it for, yet it will not get overly tight.

I'm a professional photographer and I'm always looking for convenient clamps to secure my equipment in space-saving ways.With these Camvate clamps, I can put lights right where I need them and also work well with trail cameras etc.The primary segment is cut from a solid piece of aluminum. There are 12 spots to secure a 1/4-20 threat which is also standard for most tripods. There is also a centered 3/8 - 16 thread opening so even audio gear is compatible.It opened to a maximum of 1 and 5/8" inches, so can put it on a 2x4 frame or clamp to a table top etc.It has pads made of soft plastic so you won't mark a table or scratch glass surfaces.The threaded portions for adjustment are steel with a solid plastic articulated arm and plastic twists for securing in place.For the money, I definitely recommend these clamps. I'm impressed and compare them with "small-rig" gear. Don't even think about putting a DSLR body on this, with any vibration it will likely shift. But for led light panels, strobes, audio microphones etc... good to go!

Nice powder-coated, machined aluminum, main clamping body, with pipe-notch and 12 threaded mounting point options for the ball-stud for powder-coated clamping pivot arm. Smooth clamp positioning and firm lock nut action. Decent workmanship. For the price, this clamp should have stainless threaded hardware however. Clamping range is up to ~2.5" if you remove the c-clip retained circular pot metal clamping head on the threaded rod. Ball stud does not have wrench flats or hex faces so need a non-marring plier set is recommended to relocate threaded ball stud to desired position, without damaging its plating.

I bought this for my mini projectorand it mounts perfect in my bedroom headrest

I bought these for battery power security cameras, although they can probably be used for other cameras as well. Its not the prettiest thing to use, its a bracket and a plastic mount. There's a bunch of mounting holes on the bracket so you can adjust where and how the mount goes. I figured this wouldn't be very sturdy but surprisingly its very sturdy and can hold the cameras in pretty much any direction I've tried so far.

I needed a cheap clamp to hold a camera onto an oddly shaped window sill, and this would have been perfect out of the box if the far end of the clamp was the same length as the adjustable plate; as is, that extra protrusion made it impossible to use this clamp without the addition of a wooden shim. A little bit of that though and my camera is firmly attached.

I purchased this to mount a small projector on and it seems it will work just fine. Quality made.

Easy to put on a headboard and easy to use

GOOD

C'est vraiment un bon produit. Je m'en sers sur des observatoires, pour y mettre une caméra et la stabiliser.Il est très flexible dans le sens que l'on peut choisir le vissage selon ce qui est disponible dans l'observatoire.Il inspire confiance par les matériaux utilisés. bref je recommande.

Buen producto, se ve y se siente de buena calidad, lo use como soporte de la Camara Pan de Wyze para monitorear a mis gemelas, le quedó perfecta.

Ich verwende dieses, doch recht günstige Produkt, vor allem um meine Spiegelreflex (EOS 6D) als Webcam nutzen zu können. Ich habe es aber auch schon mit verschiedenen Objektiven verwendet um Natur bzw. Langzeitaufnahmen vom Balkon aus zu machen. Kann man alles machen.Getestet habe ich das Stativ allerdings nur mit "kleineren" Standard Objektiven. Von der Stabilität her sollte es aber auch in der Lage sein größere Objektive halten zu können. DIe Schrauben sind sehr gut zu befestigen. Die Handhabung ist sehr einfach und natürlich kann man das Stativ auch für andere Kameras und Objekte mit Stativgewinde verwenden.Der Arm ist frei einstellbar und damit sehr flexibel und erreicht nahezu jede sinnvolle Position. Ich selbst habe das Stativ mittlerweile fast nur noch an meiner Schreibtischplatte angeschaubt wo es sehr gut hält. Es gibt keinerlei Zwang das Stativ, wie auf dem Bild, zu befestigen, auch an der Schreibtischplatte hält es absolut super.Die Verarbeitung wirkt optisch nun nicht so gut, Kunststoffteile weisen teilweise kleinere Kanten auf die auch fühlbar sind, aber ehrlich gesagt erwarte ich bei diesem günstigen Preis auch lediglich das es funktioniert und hält.Jederzeit gerne wieder!

Good solid C-Clamp Mount.Unlike it seems some of the other reviewers here, the double ball mount on my unit is made of metal and feels solid and secure and so far has not come loose.Clamp is made of solid alloy, with rubber protectors on clamp arm and screw - so should not damage whatever it is clamped to. The clamp has a number of drilled holes offering a range of positions for the ball joint (or other 1/4" mounts) to be mounted.As said the double ball joint on my unit is metallic and feels very secure and supports my Panasonic GX8 with a 45-200mm zoom at full extension with no problem.So far very impressed.