This DIY replacement part fits Berkline and many major recliner brands. The D Pull handle is the standard 1.5" by 2.75". The 6 hole plate at the neck of the D Pull is 1.25" by 1.625 (SCREWS NOT INCLUDED). The neck of the handle (from the top of the handle to the top of the mounting plate) is 6" long. The cable from below the handle at to the end of the S tip 42". From the start of the exposed wire (at the end of the 3/4" clip) to the S shaped ending is 5" long. This cable handle is a pull type or sometimes called a parachute or "D" handle. This is used on reclining furniture that has the handle in between the seat and the arm (you reach down beside the seat cushion and pull this up). The critical measurement for D pull assemblies is the exposed wire. The total cable can be as long or longer than your current cable and works equally well with or without a spring on the exposed wire. The excess cable will just hide inside your sofa. For any DIY project, measurements and fittings are very important. To measure the exposed wire length, pull the exposed wire taught and measure the wire length from the end if the plastic clip to the end of the metal tip. The exposed wire and ending shape are critical for the proper operation of the footrest mechanism of your reclining furniture. Please remove the broken or damaged handle and save any screws or attachment pieces. Carefully observe the attachment of the exposed wire to the footrest release mechanism and the position of the mounting clip when removing the handle. There are several lengths of cables and exposed wires as well as mounting plate shapes.
Trustpilot
1 month ago
1 month ago
