MiltonIndustries 760 1/4" MNPT HIGHFLOWPRO™ V-Style/European Interchange Brass Air Plug Fitting (High Volume Low Pressure Application) -Box of 10

Fits as expected, much cheaper online in bulk than piece meal at the hardware store

I bought 30 of these air line "max flow" fittings for 14 cents each. The reviews said they were "thin" at one point and prone to breakage. I no longer work in a commercial environment and they are only for my home garage. I actually haven't broken one yet...

I highly recommend these!

Adding these “V” type High Flow connectors and couplings to my garage pneumatic system boosted my air tools power by almost 25%. I had been using standard “M” connectors, couplings and swivel connectors. The results of testing on the Torque Test Channel got me to try these Milton connectors and now I have converted all of my air tools to them. Every tool runs better and the impact guns have noticeably higher torque. A great improvement for very little financial investment.

I was reluctant after reading the reviews of these breaking at the shoulder. It appeared to be a machining issue where the bore was cut too deep into the shoulder. I cut one of them in half to verify the machining. I was skeptical about the price, $1.50 for a 10 pack. But it looks like these are good units so I’m stocking up!

They're air fittings, they're made of brass and for a box of 10 I thought the price was good. I needed a new air hose so I took the opportunity to replace all my existing fittings and couplers with the V style, brass ones from Milton. Can't say as I can tell a big difference between these and my old fittings from a performance perspective. I will say this, everything works as well as it ever did. Guessing these will last pretty much forever.

These are believed to have had the manufacturing defect corrected... No issues as of yet!

The small air fitting that comes with tools are usually the reason people complain about the power of air tools. They simply don't move enough air. Milton V-style fittings make cheap HF air tools work like the pros. And the V-style female plugs work with either type male fittings. What a great design. If you use air tools and need volume, these are great.

These fittings have been giving the boost some of my hungry air tools where in need of. My air impacts seems to be on « supercharged » mode with these. The sound of my impacts have changed for better. They must be spinning faster then before. Other air tools are probably doing better but it goes un-noticed. My air supply comes from a 60gallons air compressor regulated at 90psi. I was previously using some Milton M and T type mostly. Of course i am aware of all the reviews and pictures about those broken brass fittings. I am cautious not to drop any of my tools on the ground. So far, i have done 2 full years with these fittings and i would be lying if i said that one of them broke, NONE did so far. (14 air tools are using them). I only replaced one of these fittings on my tire inflator. It would fit only with great difficulty in the female quick coupler. I was concerned that it could be a sign of a future failure. I do mostly brakes, suspension and general mechanic jobs on vehicle. These V style fittings are simply impossible to find in any local automotive / auto-parts shops here in Canada.*I won’t hesitate to update this review if any of these fittings do brake or fail*

As others mentioned, these fittings have a design flaw (oversized hole machining/ walls too thin) that WILL make them break if you drop a medium/heavy tool on the ground with these fitted on. It's 2021 and still not revised. It's good for light tools like a tire inflator or a air blower, but I would not put these on an impact wrench at all. Use the steel fittings for those kind of tools.

Manufacturing defect that causes the tip to break off easily has NOT been fixed as of June 2021.