Trend Tool & Bit Cleaner: Industrial Strength Wood & Resin Remover, 18 fl oz, CLEAN/500

This product really cleans tools and tool accessories properly and with ease .

Cumple, no hace milagros, pero se nota.

I've been using this for a while, seems to work well even with heavily used blades that need cleaning in the worst way. Spray it on, let it soak for a few minutes, use a brass bristle brush and the resin and pitch just washes away. I use it in a small pan where I can use some water to rinse my blades and bits, seems to work very quickly and is one of the easiest cleaners I've used. I know that I would rather clean my blades along instead of sharpening, I use to think they were dull, now I know they've been in need of a good cleaning. The product goes a long way, I've cleaned over a dozen blades and still have lots of product left, the pump bottle keeps waste to a minimum.

If you have any carbide or carbide-tipped tooling (sawblades, router & CNC bits) and you work with wood, you are no doubt acquainted with the build-up of resin. In the past I have used oven cleaner (bad!) and various citrus based solvents (also bad) to clean my tooling. I tried this Trend spray and I can say it works! Spray it on and you can immediately see the resin begin to dissolve. Spray it on, let it sit for a few minutes, wipe it off. You may have to repeat a few times, but it does take the goop off! I was surprised at how much came of my saw blades! It is very thin...like water...not at foamy or bubbly spray...so it runs off quickly. No bad smell. Won't hurt your hands or the tools...no rinsing needed! Yay! 4 stars for cleaning ability, and an extra star because it's safe and no rinse! Highly recommended.

Reinigung der Sägeblätter funktioniert damit einwandfrei. Beim Auftrag/Anwendung bekommt man nach einigen Malen das Gefühl für die erforderliche Menge des Reinigers. Das reine abziehen mit einem Tuch hat bei mir jedoch nicht sofort zum besten Ergebnis geführt, ich habe eine Bürste dafür genutzt.