Auralex Acoustics Foamtak Acoustic Foam Spray Adhesive (FTSPRAY

Follow the instructions and this works exactly as designed, tacking up even LENRD bass traps with relative ease. In fact, it works well enough that I encountered challenges with the traps sticking in place premature to having positioned them in the final place where I would like them. Applying this spray is extremely easy, the amount and pattern for the spray is adjusted by turning the nozzle and also how deeply the canister spray head is depressed. You can get relatively precise sprays of 2-3 millimeters in this way or high flow sprays up to 7 to 10 centimeters in this way on the reverse side of the acoustic foam. There is some VOC smell from the spray but I have to say that it is FAR lighter and more easily dissipated than the textile adhesive which some competitors to Auratek have shipped me in the past. Overall, I am very happy with my purchase of the Foamtek and for the next stage of my sound dampening will be using this spray rather than messing at all with the tube of caulk-style adhesive.

This product works great on your wall mounts. It is NOT as good as the kind you use a caulk gun to apply for ceiling tiles. The caulk gun is hard to squeeze out your hand gets tired. So use the spray on the walls and the caulk gun tube type for the ceiling.

I purchased two cans of Auralex FoamTak to mount approximately 86 sq. ft. of acoustic foam panels and bass traps to the interior walls of a voice booth that I'm currently completing. There are lots of other products that claim to be effective for mounting acoustic foam to walls, but NONE of them come close to Auralex FoamTek. First, FoamTek will allow you to remove the acoustic foam from your walls, leaving little residual adhesive — adhesive residue that is easily removed from most surfaces. Second, one can of adhesive, judiciously applied, can be used to mount 50 sq. ft. of acoustic foam. FoamTek costs more than other adhesives, but it's well worth the extra expense. Be sure to go to the Auralex Website to view informative videos on how to properly cut acoustic foam — use an electric carving knife — and how to properly apply the foam to wall surfaces using FoamTe adhesive. (I did not use Auralex brand foam, but instead ordered all my foam direct from a manufacturer in Michigan for a fraction of the cost.)

The product it's self is great! Easy to use and sticks really well to foam and plywood. The problem is the spray nozzle. It came out after using only 1/4 of the spray with normal use. I would understand if I dropped it or was rough, but i wasn't. Like I said good product, bad packaging.

My boyfriend had an issue with putting up his sound proofing foams, they kept falling off after just a day so I ordered this hoping it'll work and it is amazing. It's been about a month and they're stuck there. The moment he started applying the foams with the spray he knew they worked well. I'd recommend this for anyone putting up their own sound proofing system in their rooms.

Auralex FoamTak Adhesive is ideal for attaching Auralex panels to walls. The only disadvantage I have found is trying to remove it after removing panels. Nothing seems to break it down.

Get This! Be Careful it holds quick... you won't be ab;e to change position. I recommend a much shorter time to set before putting parts together... If you only wait 15 sec instead of the 30-60 recommended... you might be able to make fine adjustments... But I first made the mistake and bought the tube type... it worked but for ceiling mounting did not hold and I was not going to stand there all night. This works FAST and solid....

I thought I would get away cheap by using the typical 3M spray adhesive from Home Depot, but after a couple of months that adhesive gave out and my tiles were lying on the floor. This Foamtak is a much thicker 'stringy' type of adhesive and the nozzle is adjustable from low to high - medium worked perfect for my Auralex Studiofoam tiles. I'm not sure how this could come out "runny" as one other review noted (bad can/didn't shake up sufficiently?). This comes out like thin silly string and you can be very accurate with it - I had no drips or runs whatsoever. The cheaper 3m stuff comes out like hairspray.

If sticking foam to walls, though expensive, this works perfectly. Learn from my mistakes and don't waste your money on cheaper products hoping they will work. Tried £4 and £7 spray glue for acoustic tiles before this one.