🔥 Unleash Your Inner Artisan with Mr. Volcano!
Mr Volcano Rigidizer is a 16oz concentrate designed for hardening forge foundry furnace insulation blankets, compatible with Superwool LBP and Ceramic RCF styles. This winterized solution ensures performance in colder temperatures and can be easily mixed with water to create 32oz of product, sufficient for multiple burners. Proudly made in the USA, it combines quality and efficiency for serious artisans.
J**N
It’s a good product for the quality/price it offers.
The MR VOLCANO rigidizer fulfills its purpose, which is to keep the ceramic wool firm and prevent it from coming loose, whether due to tearing or wear. The full container is enough for two applications. If you bought it for use in your forge, simply use half the container. Add water based on the proportions specified in the manual, and spray it with an atomizer.The ceramic blanket will be ready once it is soaked or superficially wet. Do not use the entire product on the ceramic blanket; just use half and spray it lightly. Then, let the ceramic blanket air dry for a full day (24 hours). If it still feels a bit damp, use a heat gun or, in my case, a hairdryer.It’s worth mentioning that if you didn’t understand how to spray it lightly, the product has a red tint. Simply spray the product mixed with water onto the ceramic blanket using the atomizer. Once you see the ceramic blanket completely red on both sides, you’ll know the product has been fully incorporated.Good luck with your project
W**L
Great Ridgidizer for the Ceramic Blanket in your forge!
Got the ridgidizer in today, a16oz bottle from Mr Volcano & put a 1st coat on the thermal insulation blanket. It has to dry completely, but so far it looks great! 👍I've been waiting for this item to finish my forge! Thanks so much, for your help with the order mixup!Update: I have applied 2 coats to the ceramic blanket & then let it also dry for a good day in the sunshine. It is Amazing how Great this product performs! I am sold on this product for life. I have never had any other ridgidizer perform like Mr. Volcano's Ridgidizer! This turns the ceramic blanket into a very firm, tough blanket. I don't know if it will last the life of the forge, but I don't see it deteriating any time soon. I Can't Recommend it Enough! Seriously the best product I've ever used before!
L**P
Easy to use
Works great use as directed the red tint in nice since it ensures you get full coverage 1:1 mixing ratio Let wool dry before you apply refactory
D**E
Not very concentrated
Not the best riding user I’ve ever used. But the least expensive. I think it would have worked better without going full 50/50 on the mix. I think it was too water heavy and didn’t disperse as well as it could have.
K**E
Excellent product
Worked great. Plenty left for later use
L**E
Works great
Thank you
P**R
Works great!
Works like it should! Having it colored is nice, you can see where you sprayed it (I used a generic spray bottle) and it lightens when it dries. After it hardens, it much easier to spread refractory cement on. I used ~80% of it on a small 2-burner forge.
M**O
Good buy, works great!
This stuff worked great. I sprayed it on the fiberglass wool in my Propane foundry. It stiffened the wool so that it held up very nicely as I spread the foundry cement on top. Enough for several applications! I did need to wait several days for my application to fully dry. P3rhaps I sprayed it on too thick?
Trustpilot
2 months ago
1 month ago
