Deliver to Saint Kitts and Nevis

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

FLUKE networksPRO3000F60 Filtered Probe

Q: could you use this to trace automotive wiring, say from a turn signal light to the blinker module? I guess the 2 major concerns are could you just attach 1 clip to one wire and be able to find that wire and 2nd will it still work even if there is something at the other end of the wire like an ecm.

Yes, but there are a couple of caveats. First, as others have said, it has to be a dead circuit. This toner is designed to be used on a circuit with no power. Otherwise you will kill the toner. Second, this unit is very powerful. What that means is that you can get a lot of signal “bleed”. For example, the more exposure your signal wires (wires A) have to other wires (wires B) the more time bleed you will have on ‘wires B’. If they cross paths you could pick up the tone on wires A you are testing on as well as wires B you are not testing on. If they have a lot of exposure, for example if the wires run side by side over a good distance (such as wires bundled together in an automotive wiring harness) you will get a VERY STRONG tone on wires B. So strong that you can’t tell the difference by tone alone. That’s what’s nice about the continuity feature. You can confirm by shorting the pair of wires you suspect and the tone will change confirming that’s the pair of wires you have your leads hooked up to. So, yes, but you need to confirm it.

Q: I've had three wall outlets go dead (not at the same time) within the past few months. Would this tool help me find the problem? If not, what can I do

If you mean a Power Receptacle then no you need a Power Receptacle Tester, its a 3 prong tester with 3 LEDs you plug it in and tells if you have a short etc. If your house or office is properly wired the junction box should be labeled correctly and should be able to reset the breaker. Other wise you have a bad breaker and need an electrician.What this tool is for is for tracing Phone and Network Cables back to a Panel when the jack and panel have not been labeled correctly. Basically it emits and audio tone across to wires and you would not want to connect to high voltage Power lines you would destroy the device. Their is a similar item for electrician at flukes web site I believe this what you want, http://en-us.fluke.com/products/electrical-testers/fluke-t5-1000-electrical-tester.html

Q: Electrical panel was stolen and the wires were cut. Could I use this to trace cut wires back to the pumps, lights, etc.?

So long as the wires are not powered - and you have access to the un-shielded wires at the other ends (outlets, lights, pumps) then it can be done. Two people and communication makes the job faster. Remember to trace mainly the Hot or Phase leads, since the Neutral and Ground will go many different places. Also, to get started, cross-connect all the Neutral leads at the panel location and use that for the 'Black' lead on the Toner. I've done this a few times. I hope this helps.

Q: Can i use this to trace a coax cable

I use these to trace bundled coax inside a cable headend (data center). Strip the coax to expose the stinger. Clip the red aligator clip to the exposed coax copper stinger. Clip the black alligator clip to a non painted metal surface. I use a screw that is sticking out of the rack or to the rack ground strip inside the rack. Also clipping it to the base of a ground lug that is bolted to the grounding strip works well. That will give you the most accurate and loudest signal when tracing a cable in a large bundle.

3.8/5

Product ID: 432086336

Secure Transaction

Details

Brand
Fluke Networks
Power Source
Battery
Style
PROBE WITH
Color
yellow
Item dimensions L x W x H
9.25 x 5.08 x

🔄1-button mode switch

🔋Auto-off battery saver

🔍Filtered tech

Frequently Bought Together

Fluke Networks PRO3000F60 Filtered Probe

Aproca Hard Storage Travel Case for Fluke Networks Pro3000 Tone Generator and Probe Kit

Description

🔧 Trace with Precision, Connect with Confidence!

📢 LOUD CLEAR ALERTS - Audible probe speaker designed for noisy environments, ensuring you never miss a signal.
🔊 CRYSTAL CLEAR TRACING - Innovative filter technology eliminates interference for precise tracing.
🌐 VERSATILE CONNECTIVITY - Trace wires on non-active networks, ensuring you’re always connected.
🔋 SMART POWER MANAGEMENT - Auto-off feature extends battery life, keeping you powered longer.
⚙️ EFFORTLESS MODE SWITCHING - Easily toggle between filtered and unfiltered modes with a single button press.

The Fluke Networks PRO3000F60 Filtered Probe is a cutting-edge tool designed for professionals needing reliable wire tracing. Its innovative filter technology effectively blocks interference, allowing for clear signal detection. With a simple button press, users can switch between filtered and unfiltered modes, making it versatile for various networking scenarios. The probe features an auto-off capability to conserve battery life and a loud speaker to ensure audibility in noisy environments.

Specifications

Brand	Fluke Networks
Power Source	Battery Powered
Style	PROBE WITH 60HZ FILTER
Color	yellow
Item dimensions L x W x H	9.25 x 5.08 x 2 inches
Specification Met	CSA, FCC, RoHS
Upper Temperature Rating	6E+1 Degrees Celsius
Measurement Type	Ohmmeter
UPC	754082146001
Manufacturer	FLUKO - pallet ordering
Global Trade Identification Number	00754082146001
Part Number	PRO3000F60
Item Weight	6 ounces
Product Dimensions	9.25 x 5.08 x 2 inches
Country of Origin	Malaysia
Item model number	PRO3000F60
Size	Probe with noise filter
Pattern	Probe Kit
Item Package Quantity	1
Measurement System	US
Usage	professional
Batteries Included?	No
Batteries Required?	Yes
Battery Cell Type	Alkaline

Have a Question? See What Others Asked

could you use this to trace automotive wiring, say from a turn signal light to the blinker module? I guess the 2 major concerns are could you just attach 1 clip to one wire and be able to find that wire and 2nd will it still work even if there is something at the other end of the wire like an ecm.

I've had three wall outlets go dead (not at the same time) within the past few months. Would this tool help me find the problem? If not, what can I do

Electrical panel was stolen and the wires were cut. Could I use this to trace cut wires back to the pumps, lights, etc.?

Can i use this to trace a coax cable

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Meera L.

Smooth transaction and product arrived in perfect condition.

3 weeks ago

Khalid Z.

Great experience from order to delivery. Highly recommended!

1 week ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving millions of shoppers across more than 100 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

$2446

Duties & taxes incl.

Saint Kitts and Nevisstore

Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

Abdullah B.

Great price for an authentic product. Fast international shipping too!

3 weeks ago

View all Trustpilot reviews