Mallet Enduro Pedals, unisex, Mallet Enduro

Excellant grandson very plessed

Great pedals are my go too. would highly recommend.

Swapped from Shimano to Crank brothers and overall a good change. Foot hold is great, release v easy, just lacks the snap you get with the shimano SPDs which you get use to after a couple of rides.

I got these pedals for Christmas 2015. I wanted to ride them for a few months for giving a review. I come from riding flats on my mountain bikes and heard from everybody that clipless was the way to go. I had to give it a try, but I have watched my buddy "stop and plop" fall on his clipless often enough that I was a bit reluctant. I paired these pedal with Five Ten Impact VXI Clipless shoes. The combination of the shoes and pedals are very versatile. I wanted a pedal I could ride both clipped in, and as a flat for those sketchy technical sections where I often like to put a leg out. It took me only a couple a rides to get used to clipping in, but a bit longer to get comfortable clipping out. It's easy to unclip, so long as you anticipate when that need will arise. The problem for a new clip rider like me is sometimes if forgot, and plopped over. That's what elbow pads are for :) I have probably fallen a dozen times due to my feet being clipped in when I came to a stop, and I forgot, and leaned the wrong way. All of those incident were at low speed while coming to a stop, not while riding. I have now been riding them for 2.5 months and rarely have that problem. My recent success has been a combination of anticipating when I need to unclip, and getting my muscle memory up to snuff. I like riding these as flats when I hit the rough rocky technical sections where my bike might stop suddenly necessitating a quick foot drop (both uphill and down). At first, I had the pins so low that the center spring was so high that my shoes wouldn't touch the pins. You can ride like this, but it doesn't inspire confidence because the center clip does roll, and although I rarely slipped, it felt like I could at all times. Next, I raised the pins to be taller than the center spring. They rode great as flats, but it was hard to clip in, and really hard to twist out because the pins dug into my shoes too much. I finally hit the sweet spot. I lowered the pins to be just below the center spring in terms of height. Perfect, I can clip in and out at will and ride them like flats when I felt it was necessary. I really do love being clipped in when I am climbing smooth trails or fire roads. It makes a big difference. I have tried regular flats a couple times since, and miss the clippless efficiency. I love being able to switch on the fly to ride these pedals like flats when it gets a bit rough. With the pins adjusted right, they grip very well. I cant emphasize enough how important it is to get the correct shoes if you plan to ride them both clipless and flats. The Five Ten VXI is an amazing combo with these pedals. People who are used to SPD clipless should know there is no tension adjustment on these pedals. You can set the cleats to disengage at either 15 or 20 degrees, that's it. With the pins at the right height, 15 is fine. My local trails are very rocky and technical, otherwise I wouldn't sound like such a sissy about getting my feet out. On the smooth stuff, I have no worries at all. If you are looking for a versatile pedal to use as both clipless and a flat, this has to be one of the best on the market. They are still my everyday pedals. Ride on...

Perfektes Produkt, entspricht meinen Erwartungen.

Easy to clip in and out, holds well when pedaling. Platform is great for when you’re caught with a foot unclipped

Robust and really good MTB pedals that will be mainly used in enduro and downhill courses.

Très satisfait des pédales auto mallet en combinaison avec les chaussures crank brothers. Marque de très grande qualité, avec de bonnes finitions. Je conseille d'acheter des cales de couleur cuivre pour les débutants afin de s'habituer au pédale auto. De mon point de vue mieux que du Shimano ou autre grande marque.