The WeMos D1 mini Lite is a miniature wireless 802.11 (Wifi) microcontroller development board. It turns the very popular ESP8285 wireless microcontroller into a fully fledged development board. Programming the D1 mini lite is as simple as programming any other Arduino based microcontroller as the module includes a built-in microUSB interface allowing the module to be programmed directly from the Arduino IDE (requires the ESP8285 support to be added via board manager) with no additional hardware. Product code: HCWEMO0012 Microcontroller: ESP-8266EX Operating Voltage: 3.3V Digital I/O Pins: 11 Analog Input Pins: 1 (Max input: 3.2V) Clock Speed: 80MHz Flash: 1M bytes Length: 34.2mm Width: 25.6mm Weight: 10g Pin Function ESP-8266 Pin TX TXD TXD RX RXD RXD A0 Analog input, max 3.3V input A0 D0 IO GPIO16 D1 IO, SCL GPIO5 D2 IO, SDA GPIO4 D3 IO, 10k Pull-up GPIO0 D4 IO, 10k Pull-up, BUILTIN_LED GPIO2 D5 IO, SCK GPIO14 D6 IO, MISO GPIO12 D7 IO, MOSI GPIO13 D8 IO, 10k Pull-down, SS GPIO15 G Ground GND 5V 5V - 3V3 3.3V 3.3V RST Reset RST Example Sketch, drivers and instructions available on our support forum
A**R
Fantastic product. Very cheap for an arduino with Wifi
Fantastic product. Very cheap for an arduino with Wifi. Works great after a little setup. Unfortunately, I connected a servo motor to 5V pin (Which was stupid in hindsight given the current requirements for such a device) - Fried the regulator on the board - I was given to understand this board had a resettable fuse. Not so resettable it seems. That's not to say I won't be ordering more!!
Trustpilot
3 weeks ago
1 month ago
