🔧 Elevate Your Plumbing Game with Precision Control!
The Pressure Reducing Valve with Gauge is engineered for both 15mm and 22mm copper pipe work, offering a maximum inlet pressure of 12 bar and an adjustable outlet range of 1 to 6 bar. With a factory setting of 3 bar and a maximum working temperature of 65°C, this valve combines durability and efficiency in a compact design.
| Package Dimensions | 12.3 x 11.5 x 6.2 cm; 640 g |
| Material | Copper |
| Item Package Quantity | 1 |
| Maximum Pressure | 12 Bars |
| Batteries included? | No |
| Batteries Required? | No |
| Item Weight | 640 g |
B**N
Five Stars
Very easy to fit and it reduces the inlet pressure. Easy to adjust the reduced pressure.
R**.
Regulates pressure reasonably well, but 22/15 reducers were troublesome.
This works well enough, but the reducers for 15mm pipe (which had been carefully prepared) could not be persuaded to stop weeping until I soldered them on to the pipes.
B**E
Cured my pressure problem.
I had a problem with cold backfeed into the hot water circuit causing overflowing of the loft tank. It was caused by fitting a shower mixer (bought from Amazon) that was allegedly pressure balanced but was not. Using this valve on the cold main feed to upstairs and knocking back the pressure cured the problem a treat.As another reviewer mentioned, the olive/reducers for 15mm pipe require some serious tightening to achieve a seal but they do get there if you're brave enough to give them some welly. It's been installed for a few weeks now and there's been no recurrence of the backfeed/overflowing. I'd recommend this valve to anyone with high mains pressure problems.
B**R
Five Stars
Fitted quickly and easy to set up. Water Hammer on main water tank now completely stopped.
A**R
Gauge didn’t work
Gauge didn’t work
B**L
Does the job
I bought this to reduce the pressure from my mains water system down to 1.5 BAR connecting it to my sealed central heating system to ensure its always topped up and the right pressure. A precautionary fit to deal with any very minor leaks that may happen. I fitted it using the 22mm couplings the reducers I binned they didn't come with 'O'/washer seals anyway.
B**Y
Banging pipes
Fantastic sorted the issue with water hammer and no more nosy banging pipes.Just make sure you use some sealing paste when fitting on any 15mm pipes.
J**N
Need to reduce water pressure does the job
Good product, you have to be careful not to over tighten to stop the leaks. Would recommend
Trustpilot
1 day ago
1 week ago