Excel ArchitecturalDP6971 Reversible Privacy Door Handle on Rose Set with Adjustable Latch, Satin Nickel

I've got old internal doors which were fitted with Weiser type handles. They all have a large hole which are impossible to cover with regular, readily available door handles. Rose diameter are normally 50mm nowadays.After a bit of internet research we've come across these. I've only bought "Passage" type, so I cannot comment of the built quality of their lock mechanism, but happy with them so far. (Yes, you do have to pull the handle almost all the way down to open, as demonstrated by the other reviewer)HOWEVER, I don't recommend these if your doors have normal size holes. You've got a huge selection of door handles available to you now, don't throw away that opportunity. Stick with the regular door handles (Rose or Bar).But if you have misfortune of having a large bore hole like me, this is a decent enough alternative.

These handles were a good price. They are easy to fit once you have done one as existing holes needed some adjustments.They work well and look good.

I saw the other reviews but decided to risk it as it was the only privacy lock that matches our other handles. However.. it is poor quality and one of the handles really wobbles despite being attached correctly. Installation was far more difficult than a normal handle as you need a 54mm hole in the door to slot the main bulk of the handle into. Will replace with a proper door lock when I can be bothered to tackle it again..

Looking for a suitable lockable handle for a bedroom, this was the only one suitable. It looks better than others I saw; it has the curved handle and looks really nice. As soon as my wif'e's sister saw it fitted she wanted the same.I have no issues with the quality. The rose may be of thinner metal than others; I have no experience to compare, but this is fine and the handle is very solid and works perfectly.I also bought this model especially to be certain that it was interchangeable between left and right opening doors.I had to change the handle round to fit a left opener. This might be tricky for some.The inner locking nub is quite small due to the type of handle and not as solid as those on a larger front door handle, but unless someone has a disabilty it is easy to turn.I had to replace a different type of handle so it took some time to drill a larger centre hole and two side holes for the rose bolts.When done everything fitted perfectly in the place of the previous handle.So, unless you are replacing an identical type of handle I suggest you have a capable person to fit it

No apologies, I am going to jump straight in for the jugular :Be aware that not only are the handles slightly different in design to what is pictured, more importantly these handles are a low quality product and designed so badly that, if you value your door that you're intending on fixing these handles on, you should avoid purchasing them at all cost.I had to reverse the handles for the door that I wanted to use this on. This required a total dismantle (as per the supplied instructions) and therefore I got to see how badly and cheaply this has been designed and manufactured.I am aware this is not a £100 or even a £40 set of lockable handles. I don't excuse the operating design for one second, but I understand that for the price this is being sold at, materials & manufacturing costs have to be in-line.This review is for the benefit of making you aware this is NOT a quality product.I would like to counteract and correct all the 4 and 5 star reviews that I read, that originally convinced me in the first place to purchase these handles.I accuse anybody past, present AND future, giving this anything above a 3 star to simply either; not know what they are talking about, exhaling wind out of certain orifices, have only ever installed handles without locks, or most probable - have lived in a field accustomed to nothing more than the simplicity of garden gate latches their entire life. Like I said, no apologies.Now onto the details;• If you are swapping over your handles on an old (existing) door for this product, then be aware that once installed, you will NOT be able to revert back to what you had originally should you change your mind. Due to the springs inside the rose (on both handles) protruding out so much, the rose will not sit flush unless you drill out a very large hole to accommodate the spring AND the fixing screws. [Note: A decent quality handle will house the spring/mechanical parts within the depth of the rose itself]. Because of this design, the size of the hole that is required to fit these handles is so large (54mm diameter all the way through your door), that the door (especially if its a hollow door) will be too weak to accommodate any other 'normal' handle fitting ever again!Note: Read this point again! If that still doesn't put you off from buying this instantly, then you're a braver person than me if our roles were reversed.• Once you've carved out or drilled a hole large enough, the rose sections will sit flush with the door and are rigid. But the handles do to NOT sit flush with the rose sections - there is too much of a gap between the two parts. The handles therefore display a vast amount of movement in the 360 degree & 3D plane. They simply wobble in every direction.I should also mention that the shape of the handle where it butts onto the rose is not circular like the rose. Its more oval shaped and the difference between the two parts when viewed from above is not only ugly, but feels like the two parts come from different style handles that have been merged into one product.• The rose covers and thumb-turn are made from extremely thin metal. Thumb-turn is also hollow - 'Tin' effect is the best word I can use to describe the quality. It's what I would expect at this price range, but don't be fooled believing it's 'quality'.• If these handles are installed with the internal handle positioned on the left side of the door [by having to reverse them first], then you are left with the opening slot of the rose cover (the small rectangular slot) facing upwards. Not very aesthetically pleasing.• To open the door. The handles have to be turned almost 90 degrees down to fully withdraw the latch. Just so you can visualize that - I repeat, the handle has to be turned all the way until its pointing to the floor for it to open!!All other handles I've ever encountered (lockable or otherwise) only require a 45-60 degree downward turn.90 degrees is so absurd that it sounds like a bad dream - I've even had to pause and physically go the handles and operate them again to convince myself of the reality.• Unless the external handle is raised to its highest position, the internal thumb turn will not always lock the handle.Therefore the following scenarios have to take place for you to be able operate the internal thumb lock successfully:1) As you step in (to the room) reach out to the external handle, raise it to its highest position - and then SLAM! the door. Hopefully, now the thumb-turn will lock the handle.2) Step in to the room, closing the door normally via the internal handle. Turn the thumb-turn to the locked position (door handle has NOT yet locked), then raise the internal handle in the upwards direction - in the hope to raise the external handle above the horizontal position. You will automatically hear a small click if you have been successful in locking the door via this technique. However.......• It is worth noting that the design of the spring mechanism allows you to turn the handles also in the upwards direction by 90 degrees [Yes, the handles can be rotated a total 180 degrees!!].If you turn the handles upwards by 90 degrees, you run the risk of the spring getting temporarily stuck and you will not be able to re-open the door (with or without key or thumb-turn). This technique could actually be used externally to lock someone inside without the need for a key!!! Do the words 'NOT GOOD' come to mind, or are you still thinking this is a 'quality' product?[But - Hey! If you have to break the lock/handles to get out, you can always re-order an identical set of handles again.... or perhaps buy yourself a new door and a different set of handles!]Hopefully this is all academic and by having read this, you won't find yourself in the same position as me.Take my advice : Go and buy something different.

I got good results with these and they are very quick to fit once I had the hang of it.Previously replaced old corroded knobs and latches with new knob and latch equivalents but this didn't improve fouling, and sticking even using double sprung latches. So I bought these when they became available.Drilling of large hole and large rose on these lever handles allows all previous botch drilling jobs and misalignments to be eliminated. Adjustable latch very useful.I used a 57mm hole drill (as couldn't find 54mm anywhere) and think this might have helped as gave a little room to play with when installing (must get it dead centre though). I left old latch fitted and used square bar hole to align hole cutter centre drill. Impossible to start hole otherwise on an already drilled door without slipping everywhere. Don't forget to remove old latch as you drill through!Once hole is done, it takes 1 min to install levers and latch assy. Very impressed. Even frame plate is good quality.Done all 9 doors in house with passage sets. Cannot comment on other locking types.

This item is of very high quality at an excellent price.

door thickness is important when buying this product ,40mm or above