EMP (Easy Marble Polish) Powder - 3 lb

Just like the name. Very easy to use with minimal mess. Polished my travertine beautifully. I would recommend this product

Excellent product and easy to use.

This stuff is amazing! I used it to bring back some 15 year old travertine floors that have raised 3 kids and 7 dogs. This stuff with a white pad on a Oreck 12" orbital did the trick. I used a spoon to put on the floor and worked a 10sq ft area. I first mopped the floor with water and left it wet. I would then use a spray bottle with water to get the slurry I wanted. Once I worked it over the surface about 8-10 times, I would wet/dry vac it up and mop over it with clean water. After that dried, I would have to sweep up all the little plastic like beads that go everywhere before hitting it with a final polishing pad. If I didn't remove these, they would get in the polishing pad and swirl the floor. That is my only complaint, those little plastic beads but I know that is required to get the abrasiveness to get the floors to where they need to be.

Works as advertised. 10yrs experience in the field and it stands up to and exceeds more expensive products

This product etched my floor while polishing. The little splatters from the spinning polishing pad left marks all over the floor as well as from the squeegee using to move the slurry around the floor. Oddly it only left marks on the floor section I had not polished. This is a brand new floor that was just installed. Have a professional coming over to try and fix the mess. I'll try to add another comment after his input. Picture shows etching in the reflected light through a window on the floor. It's a polished cream colored marble floor.

I did use a Linde 14" floor machine. I applied small amounts of EMP on the floor and using a 3M 14" pad I applied the EMP. What a difference it made. Over the years just wear and tear had dulled all of our Marble. We where actually at the point of having it replaced. Thanks to a Youtube EMP video I was able to make it like new again. Before I started our floors had completely lost their shine. We have marble in 2 Bathrooms, Hallway, Dining room and entry way. (about 650 sq ft) You must be patient follow the directions and watch the pro's on youtube before you start. Take time and do a section at a time. I had no etching from splash nor did I have any problems with residue. I must say this is the only polish I have ever tried so I can't rate this a five because I have not tried others. But if you have more experience you may know of a better product. If so let us all know. I used the floor machine to to buff the floors after I had polished them. I used a 3M 14" 4100 Super polishing pad. Since then application of EMP about every 3 Months I run the buffer over the tile to maintain the shine. Just FYI: we discovered that placing a rug by every entry prevents dirt from shoes from wearing down the shine on the marble. Our Grandkids would run in and out and we also garden alot. Grit on shoes causes the marble to dull. I now can wait between maintenance buffing 6 months. Also make sure the floors are clean before you start, very clean. I swepted, mopped and then wiped down the area I was working in with a damp bath towel by hand to remove all the left dust and/or grime.