3D Printer Resin,Jamg He 10K Standard Resin for LCD DLP SLA 405nm Printer UV-Curing Photopolymer Rapid High Precision Low Odor Standard Resin (High Clear, 1000g)

I absolutely LOVED this resin! I miss it and wish it would return! It's been my go-to for transparent prints! I've gotten so many beautiful and perfect models with it! Great quality!

Detail is quite nice, but I'm thinking the '10k resolution' is just a way to make their resin sound better. I've never found a resin that didn't work with a setting as low as the printer can go. Even the anycubic translucent green, the first resin I ever used.As with all regular resins, this stuff is quite brittle, but not as brittle as the water washable stuff, in my opinion. I doubt any model printed in this would survive a drop or a fall. Small items like swords, rifles, etc will probably break off at some point. Just the nature of the water washable stuff.On an interesting note, this came with a few gloves and a USB stick. The USB has a slicing software install on it (that I've never heard of), with a 12 month redemption for the paid version (for free). I have no need of this, so I reformatted it and now it's another USB for the printers to use. Can ALWAYS use another 4GB USB stick!!As to the low odor, my nose doesn't work well, and my printer lives in the garage, so I can't say I noticed any smell, but then I never do.

Quality is great. Price would be great around 22..seems like price is up and down every other day. Won’t be buying more until price is right.

Good standard resin that works without issue using my regular print parameters.Here are the settings I used to achieve great results:* Initial exposure time: 50s* Exposure time: 4s* Rising height: 6mm* Motor speed: 1mm/s* Turn off delay: 4s* Bottom exposure layers: 5This resin has really good bed adhesion, and supports stay strong. Finish is smooth. Detail is off the charts.In my experience, it requires more wash time, but less cure time than standard resin.Bottle is easy to pour from without making a mess and wasting resin. Also a plus.Just an overall joy to work with. Great stuff!

I’m new to the JamgHe brand of resin. I print with a Creality brand printer and I kept to the recommended range of settings for a monochrome LCD screen. This resin works great and I would agree with the statement that this is low odor resin. That is not ‘no odor’, but definitely lower than some other brands I’ve tried. Resin has a tendency to ‘fumigate’ my house every time I use it and while I could definitely smell it, it wasn’t a pungent as other brands have been. With the resin came a set of rubber gloves and a filter. I have to say, I feel a little left out though as I did NOT get the complimentary usb thumb drive that I’ve seen others have gotten, but that's okay (I have a lot of thumb drives).

As others have stated, branding a resin as 10K resin is a bit misleading. Resin is liquid until it's exposed to UV and will take whatever shape is set for that layer. So 4K, 8K, and the mythical 10K prints should all work with pretty much any resin. There really aren't any 10K printers yet and 8K are only starting to gain popularity in marketplace now. Besides, with the size of the screens on resin printers, 4K and 8K would be really hard to discern.It is a decent resin, however. My test print came out fine. It is a bit brittle and with a smaller model with some smaller pieces I did break a piece off while removing the supports. It does happen about 40% of the time with this particular model. But be aware you won't want to drop delicate models printed with this resin.I had no issues with bed adhesion. Resin consistency was good after a pretty good shake of the bottle. And the odor was a cross between a water based resin and a standard resin. My models cured just fine and other than the slightly greater rigidity and brittleness, they were good prints.

As of now, there are no 10K resin printers. They only go up to 8K, but this resin prints well even at 3K. Like any other resin it's smelly but to me all resins are really smelly, even the supposed low odor. I use a respirator and all is well. The details print very well and it cleans up well. I use 90% isopropyl alcohol in a wash and cure station with excellent results.Overall, this is good resin that is easy to work with and produces great to excellent results. I do recommend!

So it took me a while to review this as my resin heater broke and printing in 60F and below temps just was not working very well. Once I got my heater fixed it printed VERY well. Biggest drawback is the cost. If they can get that inline with some other brand names I think it will take off but at this price point there is nothing special that I found that would justify more money. I printed some minis with this and then with another brand of abs-like and the abs-like held up a bit better and was a LOT cheaper. I think the detail was better with this resin but not by enough to, again, justify the cost. Odor was not too bad with this at all and I actually liked this better than the water washable. Washed well with 99% IPA.