FLASHFORGE Adventurer 5M Pro 3D Printer, One-Click Auto-Printing Max 600mm/s High-Speed with 0.4/0.6mm Nozzle Bundle, CoreXY Structure & Silent Printing, Remote APP Control & Camera Surveillance

This review is for the Flashforge Adventurer 5MI am coming from the Ender 3 v1, that I built from a kit 5 years ago. And holy crap has printing gotten easy and fast. I spent hours building, upgrading and attempting to get print settings and first layers right on that printer.Here? I took it out of the box... followed the step by step guide, removing 4 screws and pressing a few buttons and allowing it to calibrate, installing the filament holder on the back and filament, taking about 15 minutes total. And it prints flawlessly so far. I am just amazed that a 300 dollar printer has user friendliness of this caliber.The prints have come out great - the dragon took 7 hours!! Thats insane. The same print on my Ender 3 would of taken 24 hours and have a great chance of failure - around 30% failure rate. Where this printer just said whatever and printed it.The only gripe so far in 24 hours is that the touch screen is a bit finicky and you might have to tap several times to get it to register or it might register multiple taps instead. And I had to type in my WiFi a second time when I woke up this morning even though I connected it the night before.I'll probably come update this review in a week and month respectively... but...For 300 dollars (400 + 100 dollar coupon in checkout) , this cant be beat. This is on another level. Also you can buy all the pieces off the flashforge website to upgrade the 5M into the 5M Pro. They just released a DIY kit for an enclosure, with printed parts. And you can just buy the camera for 25 bucks on the site. AND one of the biggest gripes I heard from other people in reviews (although I dont particularly care)... they have released Klipper for the printer, so you can remove their OS and use Klipper if you want.

1st 3d printer. Went back to this a few times glad I bought it so far. Was out of the box and printing within an hour. Printer seems to come out good. Smooth, strong, amd so far no jamming or clogs. It has ran about 9 hours straight so far with back to back prints. It does have a small spool holder size so buyer beware. It is I think 53mm. I did purchase some pla from sunlu that was .25kg and they fit. I did find some files for larger spool adapters.

UPDATE: 2 Months later2 months in and this is the worst printer I have owned. While the hardware itself is "fine" and works, the software/firmware have been a nightmare. The original software options barely functioned for remote monitoring and in the last couple of weeks they released Orca-FlashForge and FlashMaker.Problem with BOTH software is they were basically release as beta software and the remote functionality is broken. I spent 2 weeks with tech support and they have basically been useless. I've gotten better support from Comcast which says a lot.I also printed the official Flahsforge enclosure and bought acrylic panels for 50 bucks. Bought the camera for 25. Both parts being officially from Flashforge you would think they can work together but the camera cable was too short. Their supports response was it is indeed to short and I should source my own extension cable...My experience has been poor and I would never suggest this brand to anyone else. Avoid like the plague and spend you money elsewhere.Original:Wanted to wait a month before writing a review so I could fully use it and test.To those who don't want to read a novel. Its a good printer with LOTS of potential but as with most things you shouldn't buy on how good it "could" be.Out of the box the unit setup was quick and self explanatory. I last printer i purchased was the Creality K1 which had its own set of defects (which they fixed) so I was prepared for a hassle. Turns out everything was simple and I was printing within 30min.The issue begun happening after a few hours of printing. What everyone says about the included bed is true, its crap and you should get a replacement. I contacted Flashforge and they sent me their PEI bed right away when I mentioned the issue so anyone who purchases should be the same.With the bed issue resolved I can reliably get good quality prints. I use PLA and PETG with no issues and quality is equal to my K1 and just as fast. Any issues from are slicer or user error.Now for my real gripes starting with the software. The 5M uses Klipper which is awesome but its locked down and unless you super savvy there is no way to easily unlock its full potential. They have github page for the klipper but its useless for the average person.Next is the FlashPrint software, Its ok but very limited. Flashforge themselves suggests Orca slicer which is indeed great but then you cannot wirelessly sent prints and have to use a thumb drive. I tried using FlashCloud and Polar3d to remote monitor the printer and that also feels lacking in control and reliability. Creality Cloud despite all the spam is significantly better for remote management and control.I also purchased the Adventurer 5m camera direct from FlashForge. It took over a month to arrive and their communication TERRIBLE but I did end up getting it. While capturing time lapses is great, using it with FlashCloud or Polar 3D is terrible and again, remote management sucks.Lastly lets talk these hotends. Quick swap is great but 30 bucks per hotend is terrible. Luckily this is my secondary printer and I don't print abrasive materials but if you go through hotends regularly your wallet is going to cry.There is a lot of potential and promised updates. They CLAIM there will be full klipper support, OEM led lights, enclosure kits and more but they are radio silent as to when. I got time to wait and the ability to tinker on my own but if this is your first printer or you want something feature rich with no bugs, look elsewhere. My K1 with upgraded hotend/extruder has been reliable and I would highly recommend that over this (when its on sale)

This is my first 3D printer. Late to the game, I was printing a very complex Slappy Dummy head within 30 minutes of taking it out of the box. Orca Slicer is apparently a clone of bambu slicer, and it seems most of them are the same, but it has TONS of options that allow for custom scaling, support styles/placement, and any filament on the market in 2024.I've been printing almost non-stop for three + weeks now with some failures that were easy to diagnose and correct. The hot plate has excellent adhesion with PLA as long as it is kept free of hand oils. I have only needed the glue on a full size Jason V. hockey mask I printed for Halloween.I found that PETG sticks very hard to the build plate if the temp is above 65d and is very hard to get off.High speed PLA, PLA-Silk, and PLA Pro all print and come off the plate perfectly.The enclosed design keeps noise down and dust out very well. I have not smelled any fumes whatsoever so far thanks to the dual internal and external air filters.I found that trying to print directly from a USB stick can cause move queue errors due to read/write speed so copying all files directly to the printer's memory avoids this.It has a filament senor that stops the print if it runs out without letting the nozzle get empty so you can easily put in a new roll and it continues without issue. Also, it recovers from a power outage or accidental disconnect without missing a beat.For the price I would buy this again in a heartbeat.