Big FloorsRaceDeck Diamond Plate Design, Durable Interlocking Modular Garage Flooring Tile (Royal Blue, 12 Pack of 12 x 12" Tiles)

For what you pay for these they are just cheap. Even separating the pieces from how they are packed left a couple tabs bent and i was very careful. But the “kicker” for me was after it was assembled and i pulled my car in the rear wheel drive vehicle kicked the entire floor out behind it. If I’m spending this much the floor should stay in place. Some simple rubber feet on the bottom would cost racedeck Pennie’s but instead the customer is left with the problem of sliding floors to keep in place. Good looking but that’s it. Would not recommend .

Great product but unfortunately you need a a lot of them to cover and floor area in a garage.. they are not cheap for being a plastic square . I returned my order on principle of the misleading sale. The pics looks like your getting more than physically usable.

I ordered a pack of 24. They are shipped in squares of 4 clicked together.Separating them was a PITA. I had to use a screwdriver to lever the tabs apart. Then I had to use a hammer to engage the tabs. I also had to wear work gloves because the edges of the pieces are sharp enough to hurt.

Great and easy to install! made the room look great and very durable!

The media could not be loaded.  It was easy to install. Get a large rubber mallet and tap the lock down areas. Don't use your hand, because you will wear you out.

I had to get a hammer to snap these together. I also had to turn the tiles over to hammer the snapping portion of the links into the receiving loops. I cannot imagine how I would have done this on a larger portion, or how I would flip the whole thing back over when done. The loops will not align well enough to be able to do this right side up, nor will the snapping links allow the loops to pass through if hammering from the top of the tile. Shipped to me already connected 4x4.

Great product. Installed in my garage which doubles as a wood shop.Cuts easily on any saw using a PVC blade (regular wood blades will cause melting).I notched out around various obstacles and my anchored shelf posts.Left 1/2" gap around the perimeter per the instructions to eliminate the buckling in heat.

I use this for motorcycles on grass/uneven surfaces. Works great. Durable, easy to connect and disconnect once you get the hang of it. Not the cheapest thing out there, but it'll last a long time.

I bought this RACEDECK Diamond Plate Design 48 pack from Amazon Warehouse Deals to cover my shed's concrete floor. The floor was oil stained, dirty and a bit uneven. I had to use a large rubber mallet to connect the tiles in a few places. Other than that, the installation went well. I used a 10 inch compound miter saw, with a 80 tooth blade, for the few tiles that needed cutting. The floor sounds a bit hollow when walked on but is definitely strong. Because of the Warehouse price I was able to afford this floor, otherwise I would have cleaned the floor and used a epoxy paint.

Good product but cost way to much, you found for 129,99 at costco

Finishing my garage floor.Product arrived quickly and was very easy to put together. I mixed Alloy and Royal Blue colors and it looks fantastic.

Cabanon