INCLUDES 2 SCREWS + 1 L-WRENCH. THE SCREWS ARE CUSTOM MANUFACTURED FOR MAGNUM AIRPOWER LLC, THEY WORK EXCEPTIONALLY WELL AND ARE NOT AVAILABLE FROM ANY OTHER SELLER. This Torx-drive stainless steel screw is an exact-fit replacement for the original inner breech screw on all Benjamin Discovery & Maximus models. The Torx socket fits a T8 driver which is not included. These are 410 stainless steel heat treated to meet metric class 12.9. Do not over-tighten the screw, snug it down only until the breech is firmly against the tube with no wobble. If you tighten too much it can damage the threaded hole in the tube. Holding the L-wrench by the shorter side helps avoid over-tightening. INNER BREECH SCREW LOCATION: For Discovery & Maximus it's underneath the bolt, if you pull the bolt all the way back you can barely see it under there. You have to remove the rear breech screw and rear trigger frame screw to take off the rear tube plug. Then remove the bolt handle. Now you can push the bolt back far enough to expose the inner breech screw. I suggest putting a tiny amount of medium strength threadlocker on the bolt handle when you put it back on, they tend to come loose otherwise. Install the handle finger tight only. Using a wrench can damage the threads. I HAVE A DIFFERENT LISTING FOR 2 SCREWS WITH NO L-WRENCH.
Trustpilot
1 month ago
2 months ago
