MontechKing 95 PRO Dual-Chamber ATX Mid-Tower PC Gaming Case, High-Airflow, Toolless Panels, Sturdy Curved Tempered Glass Front, Six ARGB PWM Fan Pre-Installed with Fan Hub, King 95 PRO Black US

I was having issues with my case so I was in need of a new one. After researching I found that this Montech King 95 Pro seemed to be the best for the price. After getting everything together I found out it was pretty much perfect for me!Pros* Price - While not the cheapest case out there, what you get for the money is pretty unreal. It is seriously feature rich.* Installation and Cable Management - Installation for this case is a breeze, it has a pinned stand off for alignment of the motherboard and plenty of room in the power supply chamber for all your cables. For Cable Management you have 3 Velcro straps going down the center which are plenty long to clean up the cables. It also has cable grommets are on all of the holes around the motherboard section to make everything tidy.* Hard Drive Cage - Even though they are outdated I appreciate the ability to install 2 3.5 inch hard drives as they are still a cheaper way of getting a lot of storage (I still have a couple I use for that). Of note it does block the back of the motherboard for a CPU cooler install so be prepared to remove it if your cooler requires it.* Airflow & Dust - The case comes with 6 fans pre installed (3 120s on the bottom, 1 120 on the back, and 2 140s on the side. While I didn't use them as I preferred my other fans, it is a great value addon. It has a large dust filter on the bottom and the also has filters on the side and top of the case.* Looks - Even though the curved tempered glass on the front is a bit of a gimmick, I must say it looks pretty cool in person. It has a large RGB strip on the front that is nicely defused and the overall builed is very pleasing to look at.* Build Quality - This is a very solid case, I didn't feel any flex at all while installing everything and there were no loose parts I could feel. Whileit does have plastic panels they don't feel cheap and don't really look like plastic.ConsWhile this case is near perfect I do have a couple gripes/suggestions for a future version.* Bottom Dust Filter - The case is designed so that you remove the filter from the back, which in most cases it makes it more difficult to remove due to the size of the filter. The size needs to be long as it needs to accommodate the 3 fans on the bottom, but it makes it so you would need to physically move the case to get it out. There is a lip on the bottom of the case in the front that is meant to stop the filter that can somewhat prevent you from inserting the filter from the front. I was able to install it from the front, at least with my case by working with it a bit. While reading reviews I've seen that some people have brooken off the lip, so I think the best solution would be for Montech to make this piece movable with screws so that it can be installed from the front or back.* Top Panel - Beware when installing an AIO as with some of the screws it can cause the top panel to not seat in correctly, there must be very little space in between the AIO panel and the panel. I found a set of screws that came with the case that fits the AIO which were lower profile that fixed the issue for me. But if Montech reads this it would be a good idea to add another couple milimeters of space above the AIO plate for better fits.* GPU Sag - This case has no anti sag bracket pre installed, so if you have a larger card prepare for some droopage. Due to the fans below the GPU it can be tricky to find one that works well, so having one built in would definitely be a plus. The solution I used was the Lian Li GB-001 since it stays well hidden since it mounts to to the motherboard stand offs, but would still prefer a built in solution.Overall this is a pretty amazing case and I would recommend for anybody to get!

Great case. Easy to work in, easy to take things out of. I removed the drive caddy with minimal effort. The design is amazing, my favorite case on the market right now. Functionally amazing, maybe a little heavy but it’s a big case.

The best case I have ever purchased. This case was so easy to transfer my compents into. On top of that just being one of the better looking cases with the two glass panles design. It was worth every penny.

If you’re considering building a pc, this case is worth every penny. I know the case is one of the easiest places to cut cost and get away with it. It’s definitely more than you need to spend, but the customization, cable management, and quality of life aspects are life changing. You can buy a cheaper version that has less fans and rgb, (boooring) that is an even better value. This is expensive hobby, and most of the items you buy are simply no where near worth the price, but this is not one of them, 10/10.

The PC case is great to me, I satisfy with the result and how it look, highly recommend

The computers case surprise me by a size, and not to mention the amount of workflow can be done inside. There's definitely a lot of cooling capacity and multiple fans could be used here now if you're looking for a good look and big design is definitely one use to get it also offers a RGB feature was a perfect gift for Christmas.

Great case came with a 2 inch scratch on the main glass tho 😒

If you're looking for a good "fish tank" style case, this is it. I went with the non-pro version since I already had fans I wanted to use, and I'm very pleased with how it turned out. It was also very easy to build in with it's spacious, dual-chamber design. I didn't have any issue routing and managing all the cables in the back area.Being my first case with this much glass, I was slightly worried about thermals. The case however performs extremely well for me and I usually average temps of about 60-70 degrees Celsius under load (with a Ryzen 9800X3D CPU).Pros:- Spacious & easy to build in- Low fan noise levels- Beautiful to look at- Excellent customer service (see below)- Comes with a mesh front panel if you want/need extra airflowCons:- Easy to smudge glass (as with any case like this)- A little on the heavy side with everything installed- Side and top dust filters are affixed to the panels (this is more of me just nitpicking things, though)- Also not a huge deal, but the bottom dust filter requires moving the entire tower if it is placed near a wall to remove itOverall I'd recommend this case, as I think it is much better at this price point than some of the other alternatives out there.Side note:If you have any issues with the case, don't hesitate to reach out to their customer service. I had unfortunately gotten a scratch on the side glass panel but I was able to get a replacement panel shipped to me quickly after talking with their customer support. Even though I didn't have to pay for the replacement panel, I would have gladly done so if I needed to.