Streamlight69273 TLR-6 100-Lumen Tactical Weapon Light with Integrated Red Aiming Laser Designed Exclusively and Solely for M&P Shield and M&P Shield Plus, 9mm/.40 Only, Black

Works great.

Review date: 8-25-24, Revision: A...My light is not used a lot. I've only had it for a while, 6 months. But the battery was dying. The symptoms was the flashlight went out but the Lazer kept working. The light worked fine if I shut the Lazer off.Bottom line. If you see this, behavior, than you need a new battery (two new, CR-1/3N, batteries actually).-------------------*****************Review date: 2-12-24, Revision: A...I have an original shield 9mm. And it fits on the trigger guard and uses the "proto rail," as a alignment point (there's no rail on the original shield).It fits fine. I noticed that you need to be careful to not strip the Allen hex, it's a very, very, tiny and so are the allen's threads (I read some, might had problems, with stripping, so I was extra careful).The light at 100 lumens is not all that bright, but they don't make a brighter one.Next up, go find a range, to sight it in.The down side, is not the lights fault, but all my old holsters, won't fit any more. So I have to buy new ones. I've already purchased a new iwb holster. But it really bums me out, that all my other holsters won't work anymore.In conclusion. I've wanted one of these lights with a laser, ever since I've owned my weapon. I hope it lasts and doesn't loose its alignment or other issues...

Overall easy install, functional, great looking.Pro's:-Easy to install-Looks great and bright. Laser is nice as well.Con's:-When installed, it won't fit in some holsters at that point. Hopefully yours has an adjustable clip, mine did and did not have a problem moving forward.-Pressing the laser/light button is tough with one hand, use two hands on the gun then press it. It takes a bit of pressure when pressing. I think after a few 100 presses it should get easier.Some say, problem with screws and stripping. I found taking your time and using the supplied hex tool it worked fine. Just take your time and be sure the screws are hand twisted before you start using the wrench for sure.Install is very easy - Just take out three screws, put one side one, put the other side on snug and fit, then replace the screws. IMPORTANT: Screws are small and thin so be sure to get a small cup/bowl to catch them if they fall so you don't lose them in a crevice or in the deep realm of carpeting or similar. If you lose one, you may have troubles or shipping wait to receive more.

Works great. Lights is not the brightest but it will do. Laser works great.

I initially disliked this until I received a replacement which worked and fit well. Installation was much easier this time. The laser and light work great and look good. I've left the review below, as it was an aggravating experience that I hope doesn't happen to someone else.Previous review listed below:The light and laser are strong and efficient. But installation is an absolute nightmare. First, I dropped the he'd key and it vanished. Of course, it's not a standard size (0.05") and I had to order a whole new set of hex wrenches as none of mine go that small.Next, when I took it apart to install, there are two sides, and then the flashlight is a piece itself that fits between the two. Except that when you take it apart the first time, the light never really sets right back in that original spot, and makes getting all three screws in impossible. I have, as of writing this, attempted install twice. Each time, I've gotten the front and upper screw easily installed, but then the bottom screwhole is bloated out and doesn't set, even when it's clamped together forcibly.Absolutely awful design, definitely won't be buying another one of these unless I can touch and feel it first. I'm sure when it's installed it's awesome! But installation has been absolutely awful, and I'm going to attempt one more time before filing for a return. Will update then.Update:Figured a way to get it installed, put in the batteries, no flashlight power. Laser stays on for about a second and flicks off by itself. I'm absolutely done with this sub-par laser accessory and am filing for a return right now. Completely unacceptable product quality. The plastic body easily chips and scratches just when installing as well, which means even if I got it attached, it would look super beat up and just overall bad.

I was looking for an affordable laser light for my Smith & Wesson M&P Shied. I found this and had some doubts as to whether it look as smooth and seamless as it does in the pictures, and if it was, how difficult would the installation process be. The bonus was the it was both a laser and a light, which I love!When I got it it took me all of about 3 mintues to install it. The directions were easy to read and installation was simple enought that anyone should be able to do it. Bonus points for the fact that the allen wrench needed was included with the product packaging.Once it was installed it was perfectly seamless and looks very slick. There is a button on both sides to accomodate both left and right handed operators. The button is well positioned so that you do not have to adjust your grip to activate the light or laser. The one drawback is that in order to switch from light to laser, you have to press both side buttons at the same time, which you cannot do easily if you are actively utitilzing the device. The light and laser are both plenty bright enought. The light is bright enough to easily light of a dark room, and the laser can be seen in daylight without difficulty.It cost jsut over $100, which is actually cheaper than most comparable devices that do not look or fit as well as this less expensive one. I have had it for nearly a year now and have not had to change the battery so far and have not had any issues.