Keene IR Anywhere IR Over IP Module (single) KIRAM

Description

The Keene IR Anywhere system enables IR commands to be sent via local network or internet.These modules will receive an IR command, convert it to packet data and send that data to a predetermined IP address (usually another IR Anywhere module). The receiving module will then decode the data and re-transmit the IR as originally received. The IR Anywhere modules are physically identical and can be software configured as either a receiver, a target or stand-alone. They will operate via LAN, and also via WAN assuming firewall and routers are correctly configured.This code is for a single module. They are also available as a pair of modules. Once correctly configured, one target can receive signals from multiple receivers. The target can be another IR Anywhere module or the IR Commander Matrix.PC/Mac software is available for initial configuration. The modules can also be used with other apps that support UDP commands such as Demopad. The IR Anywhere modules are compatible with the 36 ~ 40K IR signals used by the vast majority of domestic AV equipment. A wide band IR receiver can also be used to extend the range to 20KHz ~ 120KHz if required. The IR inputs and outputs are fully compatible with the existing Keene IR Distribution range so other styles of receivers and emitter wands can easily be incorporated. Control IR equipment via local network or anywhere in the world via internet Can be combined with IR distribution system for large installations One-to-one or many-to-one control Built in Dynamic DNS support DHCP plug and play for LAN Can be used as a receiver for the IR Commander MatrixControl 4 Drivers are now available Control4Please note that the modules are NOT compatible with IRDA based code please contact us if unsure. Other apps and 3rd party softwareThe Keene KIRA systems can be used with a wide range of othe