Birchwood Casey Fast-Drying Fast-Acting Aluminum Black Metal Finish Touch-Up Pen for Restoring Scratched and Marred Areas

I'm shocked. I had a small scratch on a Marfione custom knife. Pricey knife with a small scratch that was making me sad. I had tried the black marker trick with some success, but any time I cleaned the knife, or rubbed over the area with my thumb, the marker came off. It was strictly cosmetic and nothing more. After reading another reviewer on here had success on his Microtech knives, I decided to give Aluminum Black a shot. My process was a little different than the instructions, but it yielded amazing results:1. I first used painters tape to mask around the scratch so I could work and not worry about the surrounding areas. The scratch I was working on was right at the top most part of the knife, so I wrapped the surrounding areas.2. I applied rubbing alcohol on a cotton swab to prep and clean the area.3. I used an art-gum to gently remove oxidation from the scratch and brighten it up again. The instructions said use steel wool... I'd never. :p I've used art gums to gently clean electrical contacts on circuit boards in the past, and it did wonderful here.4. I cleaned the area again with rubbing alcohol on a cotton swab and dried the surface well5. I applied Aluminum Black... It did... a little something but not much. I had to fight with the surface to remain wet, so I gently just applied Aluminum Black from the pen tip over a 30 second period.7. I rinsed the area with a wet cotton swab8. The first application didn't do much. Nor did the second or third. Finally, around the fifth and sixth the area began to disappear.9. I noticed there was some extra blackening around the area I was working on, run off from the pen. I cleaned the knife, rubbed the entire surface I was treating with my thumb, and buffed the color out.10. The scratch was now almost completely gone. I decided to do another application, and then a final coat of Aluminum Black. This time I didn't worry about keeping the surface wet, I just let it sit for a minute, cleaned, buffed it with my thumb and repeated.11. The surface was perfect. I mean perfect. I couldn't for the life of me find the scratch after that last application. I buffed the area a little more with my thumb and then cleaned it with a wet cotton swap.12. I applied Rem Oil to the treated surface and let it soak in before buffing it dry.I'm blown away. I've scrutinized the area under bright direct lighting, natural lighting, and artificial lighting and the surface looks flawless. I am relatively confident that it will remain that way too. I buffed it well with my thumb and it's not budging, and this makes this otherwise perfect knife completely perfect again. If someone has a Microtech or Marfione knife that is scratched and you want to get it back to black, I honestly cannot recommend this stuff enough. Made a real believer out of me and I'll definitely be keeping Aluminum Black in my drawer for future repairs. Top stuff!

The reviews saying the pen does not work are the true ones. This pen came with NO paint in it. I shook it and hear nothing. The tip is white and has no paint. I pushed VERY lightly on the tip and no paint came and it also pushed into the pen right away. This product is not good. Better off getting one that has an actual pen and brush on it.

Works as described. I used it on my Holosun SCS and it blended right in. So then I used it on a lower receiver and had similar results. I think it works great on a matte black finish.Pen also came fresh, not dry.

The Birchwood Casey Aluminum Black Touch-Up Pen is a convenient and effective solution for touching up scratches, dings, and worn areas on aluminum surfaces. Whether you need to restore the appearance of your firearm, automotive parts, or other aluminum items, this touch-up pen offers a simple and reliable method to achieve satisfactory results.One of the standout features of the Birchwood Casey Aluminum Black Touch-Up Pen is its user-friendly design. The pen-style applicator provides precise control and allows for easy application. The pen's compact size makes it portable and convenient to carry, ensuring you can quickly address any imperfections or blemishes on the go.The touch-up pen contains a specialized black coating that matches the color of most aluminum surfaces. It effectively covers up scratches and wear marks, restoring the appearance of the treated area. The formula dries quickly, allowing you to complete the touch-up process efficiently without extended waiting times.The Birchwood Casey Aluminum Black Touch-Up Pen offers good adhesion and durability. The coating adheres well to aluminum surfaces and provides a protective layer that helps prevent further damage or corrosion. It withstands normal handling and light use, maintaining its appearance over time.The touch-up pen is versatile and can be used on various aluminum items such as firearms, automotive parts, and other accessories. However, it is important to note that it is specifically designed for aluminum surfaces and may not provide the same results on other materials. It is always recommended to test the product on a small, inconspicuous area before applying it to larger surfaces.While the Birchwood Casey Aluminum Black Touch-Up Pen is effective for minor touch-ups, it may not completely conceal deep scratches or extensive damage. For more significant repairs, additional methods such as sanding, buffing, or professional refinishing may be required. It is important to set realistic expectations and understand the limitations of a touch-up pen for more severe cosmetic issues.In summary, the Birchwood Casey Aluminum Black Touch-Up Pen offers a convenient and effective solution for touching up aluminum surfaces. Its user-friendly design, precise application, and quick-drying formula make it a handy tool for addressing minor scratches and blemishes. With good adhesion and durability, this touch-up pen provides a cost-effective method to maintain the appearance of your aluminum items.

Was worried with some of the reviews , when I first opened the product it seemed dry and like others said but I kept calmly tapping the marker on a counter top felt side down until I could tell the tip was moistened. The product is clear as it’s some type of acid similar to any bluing agent. I used it on my Stacatto C2 and it worked flawlessly on two minor scratches. I know they are there so I still kind of see them but I followed the instructions and over all I’m happy. Isn’t perfect but it’s not a paint which I’m happy with it. Options are something like this or hundreds of dollars for a recoating.

Works great for any touch-up. Easy to use!