Upgraded PLU Build Plate (Not PEI Sheet) for Bambu Lab A1 Mini, Room Temp Cold Printing,Flexible Double-Sided Textured Spring Steel Sheet,184x184mm Bambu Lab A1 Mini Build Plate.

This plate is advertised as being better than the Bambu plates, and I generally agree. Was able to successfully print PETG with good adhesion of the first layers and minimal lifting on the corners of the plate.I’ve noticed generally that the Bambu A1 Mini has uneven plate temperature so historically lifting at the corners can be a problem if the print towards the edge of the plate. This plate appears to perform as well as the Bambu super tack plate does but removing PETG is a lot easier. Prints cleanly pop off if you bend the plate after the plate is cooled. The equivalent Bambu plate is much more difficult to remove the prints. 900 and.I did notice some residual shapes on the plate which may be related to the plate temperature being a bit too high during printing, but overall seems to be a competent plate as an alternative to the standard PEi plate that Bambu supplies.

Great quality plate. Adhesion is fine so long as it stays clean. Build quality is awesome, should last a long time.