4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM

4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM

Q: How is this compatible with raspberry pi if it is 5v ttl? can i connect it to a raspberry pi and what voltage level activate it?

There's a driver circuit per relay on the board. The IN1 through IN4 inputs can be driven by a 5V or 3.3V logic signal, but the board needs to be configured properly. In my case the relay inputs were connected to the 3.3V GPIO outputs of an ESP8266 NodeMCU board. For 3.3V drive levels, do this: 1. Remove the jumper on the relay board between JD-VCC and VCC. 2. Connect VCC on the relay board (which powers the input circuits) to the 3V3 of the NodeMCU or Raspberry Pi GPIO Expansion connector. 3. Connect JD-VCC on the relay board (which powers the relay coils and driver circuits) to VIN of the NodeMCU or 5V of the Raspberry Pi GPIO Expansion connector. A logic low level on the relay board input activates the corresponding relay. A logic high level on the relay board input or floating input leaves the corresponding relay deactivated. Each relay consumes 68mA from JD-VCC (for the driver and relay coil combined) when one relay is in the activated state. So, when one relay is activated that's 68mA, or 4 * 68mA = 272mA from JD-VCC if all four relays are activated simultaneously.

Q: What is the third screw terminal for? i know one is gnd in and the other is gnd to accessory, but the control pins are on the other side.

Answers claiming that the leftmost terminal is common are wrong. The center terminal is common, leftmost (shown connected to the center terminal with silkscreen) is NC 'normally-closed', and the rightmost of each triplet is NO 'normally-open'

Q: Can the arduino/rpi drive this directly or are external drivers required?

RPI=Yes. The current flowing through inputs IN1 - IN4 comes from Vcc, a 5V supply and is limited by two diodes and a 1000ohm resistor so it will be about 3mA IF the picture here is the same as the board you receive. Board schematic: http://wiki.sunfounder.cc/index.php?title=4_Channel_5V_Relay_Module . More information you may need: According to the description here, the power supply will need to supply 50-60mA for each relay that is energized. No, you will need about 100mA per relay. The data sheet for the relay in the product picture http://www.datasheetspdf.com/datasheet/download.php?id=720556 says the relay coil requires 89.3mA. This is only the current that flows through the relay coil. Add to that the current the goes to the RPI and the current that drives the transistor that drives the relay coil and it adds up to about 100mA/relay. Hyetex

Q: Is diode stuff embed? do i need to hook it with external diode and pnp ect.?

External diode is embedded in the circuit

Product ID: 81127945

Secure Transaction

Details

Connector Type
Through Hole
Contact Material
Silver Copper
Contact Type
Form C Or Spdt
Current Rating
10 Amps
Mounting Type
PCB Mount

⚡10A high-current relay power

💡LED status indicators

🔌4 independent relay channels

Frequently Bought Together

JBtek 4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM

ELEGOO 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Ribbon Cables Kit Compatible with Arduino Projects

Gikfun 12V DC Dosing Pump Peristaltic Dosing Head with Connector For Arduino Aquarium Lab Analytic Diy AE1207

Description

⚡ Command Your Smart Home Like a Pro

COMPACT DURABLE - PCB mount design with silver-copper alloy contacts ensures longevity
MULTI DEVICE MASTERY - 4 channels let you orchestrate multiple appliances simultaneously
POWER UP YOUR PROJECTS - Handles up to 10A AC/DC loads for heavy-duty control
PLUG PLAY COMPATIBILITY - Seamlessly integrates with Arduino, Raspberry Pi, and all MCUs
VISUAL STATUS AT A GLANCE - Built-in LEDs keep you informed of relay activity in real-time

The 4 Channel DC 5V Relay Module by JBtek is a compact, PCB-mount relay board designed for professional-grade control of high-current devices up to 10A at 250V AC or 30V DC. Compatible with all major microcontrollers including Arduino and Raspberry Pi, it features four independent relays with LED indicators for real-time status monitoring, making it ideal for smart home automation, industrial PLC control, and advanced DIY electronics projects.

Specifications

Connector Type	Through Hole
Contact Material	Silver, Copper, Or Alloy
Contact Type	Form C Or Spdt
Current Rating	10 Amps
Mounting Type	PCB Mount
Brand	JBtek
Operation Mode	Automatic
Coil Voltage	5 Volts
Contact Current Rating	10 Amps
Maximum Switching Current	10 Amps
Minimum Switching Voltage	5 Volts
Specification Met	Ma
UPC	520361134553
Item model number	4450182
Item Weight	0.32 ounces
Product Dimensions	2.56 x 1.97 x 0.79 inches
Item Dimensions LxWxH	2.56 x 1.97 x 0.79 inches
Manufacturer	JBtek
ASIN	B00KTEN3TM
Is Discontinued By Manufacturer	No
Date First Available	June 6, 2014

Have a Question? See What Others Asked

How is this compatible with raspberry pi if it is 5v ttl? can i connect it to a raspberry pi and what voltage level activate it?

What is the third screw terminal for? i know one is gnd in and the other is gnd to accessory, but the control pins are on the other side.

Can the arduino/rpi drive this directly or are external drivers required?

Is diode stuff embed? do i need to hook it with external diode and pnp ect.?

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving millions of shoppers across more than 100 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App