Newhouse Hardware CHM2 Door Chime, White

The CHM2 doorbell sound is absolutely beautiful. For some reason, this is an extremely hard to find a trait and a doorbell… Most of them sound absolutely awful. I’m universally considered ton deaf and people complain if I try to sing, but I thought almost every doorbell on the market just sounded terrible and made me wince. The CHM2 is a bar chime doorbell, which means it has xylophone type metal bars on the inside, and they have been carefully tuned by somebody!! Thank you to this person who had some musical training who works in the doorbell factory and helped design this!Now the housing, is another matter altogether. It’s just a big hunk of white rounded plastic, and the plastic housing is actually a lot wider than the doorbell itself. Fortunately, it snapped off, and I got a Saillong doorbell chime cover here on Amazon and the whole thing looks extremely classy. It fits over the CHM2 if you pull the white plastic cover off first. I think the combination looks and sounds as nice as the $300 to $400 doorbells that are being sold on rejuvenation.com!

We got this because our original one sounds like a fog horn. This is so nice and musical.

Works good. Easy to install. My only complaint is there isn’t enough room under the cover to put the little dongle you need for the nest doorbell. So I had to stick it on the outside of the case.

Her is my story: When I bought my house, the previous owners had already installed a Ring doorbell. We transferred "ownership" and it worked great. In the meantime, we installed a SimpliSafe security system that we had brought from my previous home. last month, I decided to bite the bullet and switch to the SimpliSafe doorbell so all of my cameras can be in one app and save the Ring annual fee. But the tech-craziness then began. The SimpliSafe worked beautifully, but would NOT ring my doorbell's chime even though Ring did. I tried everything. Multiple phone calls with SimpliSafe support (worthless), changed the transformer to a more powerful 16V 30VA. Nope. So, I bought this Chime out of desperation. BAM, it works! So, if you want to use a SimpliSafe doorbell, this doorbell will work with it. One note: You still have to use the "chime connector" that SimpliSafe includes. If you don't, while this doorbell will "Ding", it makes a noticeable humming sound, which can't be good.

1

Replacing my old chime with this one was easy. The chime is old-fashioned in its design but the tune sounds pretty good. I reused my existing push button but had to remove the diode as it would otherwise constantly 'pushing'. I am not sure if the diode has gone bad or not. But removing it solved the problem.I just wish there was a way to control the volume. It's a bit loud for my taste. The cover design is also very poor. It's flimsy, and takes lots of cajoling to replace it after the installation of the base is done. Actually I was done with cajoling and had to force it really hard to attach it in the end. And why in the world do you need FOUR screws to fasten this little device to the wall?

This door chime was relatively easy to install. The design is clean and minimal which is what we were looking for. The chime sound is clear and it seems to function reliably every time. Great, straightforward solution for a basic door chime.

Our old doorbell chime had been sounding so sad, but since it still worked I just had it on my list of tasks to have our handyman do when the list was long enough to call him out for.I finally got tired of hearing that sad dong (it lost it's "ding" a long time ago) and ordered this. I called our handyman and he was away on vacation.I decided to give it a shot myself.It took me longer to unbox the chime, bring the ladder into the house and grab my screwdriver and wire stripper (I didn't even need that) than it did to swap out the old chime with this new one.It seriously just took the time to undo the 2 wires from the old chime, mount the new chime to the wall, then attach the wires to the new chime. I'm not sure if it matters, but when I took the old chime down, I took note of which wire went to the "trans" connector and which wire went to the chime connector. It was as simple as then just connecting those marked wires to the new chime.The faceplate cover just snaps on and has a clean, low profile and unobtrusive shape to it.My quick and easy swap-out was helped by the fact that the footprint of the old chime was nearly the same as the footprint of this new chime, so no patching or painting touchups were needed.The chime is clear, has a very pleasant tone, is loud enough to hear, yet not glaring or harsh.Nutshell . . . I am so happy with the new chime, and very proud of myself for doing this myself too.