◆If you make woodworking for wood flooring and do the tongue and groove joints joints on thinner wood, this is a great choice. It is a professional tongue and groove router bit for carpenter hand making wood floor or other woodworking. You can use the router bit to make a lock joint for wooden floors, and these joints have a lot more surface area and much better resistance. ◆Featuring three router cutters, this tongue and groove router bit set will allow you to produce various of diy woodworking projects including: ♥doors ♥drawers ♥panels ♥cabinet doors ♥wood flooring ♥outdoor frames ... All cutters are mounted on standard 1/2" shanks and feature industrial quality micro grain tungsten carbide tips which are razor sharp and are fully resharpenable. ◆This 3-piece woodworking router bit set that includes: 1xTongue Router Bit ½ Shank 1xGroove Router Bit ½ Shank 1x45°Lock Miter Bit ½ Shank Max Rotating Speed: 12000 Material: Alloy blade, carbon steel handle Cutter: CNC ground to a 600 grit, mirror-like finish ◆Please Kindly Note that: »Always notice to add some Coolant (like water) when operating, in case the material temperature will get very high even get smoke because of the long time operating. »The tool must be fully inserted into the casing and tighten firmly, otherwise it may lead to fracture caused damage to the tool shank.
S**F
Lock miter is very narrow
Yes I believe it can be made to work on full 3/4" thick wood. However, it is JUST barely 3/4" tall leaving zero room for setup error. If you plan to miter less than full 3/4" stock, this is probably not an issue. I fortunately have a planar and was planning to go thinner for these drawer sides anyway. But beware. Otherwise, this is a pretty nice set of bits for the price. Time will tell how long they stay sharp...
W**M
Poor Quality do not buy. Check out the pics!
This set of bots have several issues, 1 being they are not balanced at all ,2nd very dull they actually burn end grain no matter the pace ,3rd typically a matched set allows you to pull one out and with little to no adjustment you can route the other side of the work to match. These require a 1/2" adjustment to use one to the other. Do not buy these there are no redeeming qualities of these bit. Price is cheap but they are unusable.Update; I bought a Bosh bit to replace this set and if you look at the pictures the burnt one is this bit the clean one is the bosh and it felt much safer to use. I will not be buying my router bits from Amazon again.
S**E
Set doesn't match.
Groove is 1/4", but the tongue is 7/32, or 1/32 under. Not what it's supposed to be. Both should be 1/4" for a snug fit.
D**L
DON'T BOTHER
These are garbage, even for their low price. Tons of runout causes your part to chatter violently when you actually get it up against the bearing, the bits are not ground for a good match at all, and result in a very loose joint, and they are so grabby that it makes it very hard to enter a cut smoothly. That last factor also results in a lot of tear-out of the wood. Overall just miserably bad. Spend a little more for Freud or something of that quality.
P**E
Tongue/Groove worked after adding spacer Mitre lock has not set up block
I had to add a 1.5 mm or .03 in spacer to get the tongue thick enough to match the groove. It cut fine for me on soft and hard woods. After 30 attempts I still do not have the mitre lock working nicely. As others mention there is 0 tolerance beyond 3/4 in so you end up planing or making another pass with another bit.
M**A
Exactly what we need for future projects
Exactly what my husband was looking for and I know he’s so ready to put it to use!! Cat wait to see what he’ll make for me!! Seems to be very well made and will last a long time.
C**Y
Appears to be decent quality......
Upon unboxing looks good, nice quality tounge and groove seems to fit snugly, cant wait to try the lock Miter bit at the shop tomorrow, I will update my review based on performance tomorrow
R**N
Better Than Expected!
I had a "one time need" so I bought the economy set and found they are really a decent tool. They worked perfectly and I expect to use them more!
K**.
Quality
Arrived early look to be good uality
Trustpilot
1 day ago
4 days ago
