Uno Minda 850033HD ELECTRONIC FLASHER WITH BUZZER - 12V- HEAVY DUTY - WATERPROOF - 180W- 3 PIN For-UNIVERSAL

Good

Very good 👍

Nice

It works as intended - buzzer is loud enough - no regrets in buying. Only thing is paper manual is missing.Connections are B+ for positive terminal from battery, earthing for negative from battery and like ways third connector is for the load - u can connect bulbs combined with earthing connectorit would sound a single beep when connected/ powered on - and would give continuous beeps with correct load in the circuit. Some people said that it is not working with led bulbs - reason i think is it cannot create enough load/ resistance - Remember to connect right load / resistance/ wattage as given/ mentioned with the product

Going by the other reviews which say it worked with their LED indicator conversions, I took the gamble on this one. Especially when the minimum quantity to buy was 2 instead of a single one. I'm just leaving this review as another data point so that people can make a more informed decision about their particular bikes.My bike is a relatively old model honda. The wiring for indicator flashers on it is likely different to all the other reviews and Q&A answers here. I got an issue with my original flasher module when I converted all my indicators to LED. All my lights would go off at once no matter what direction I pushed the indicator lever to. Also, if your bike has a 2 pin conncection for led flasher module, then it might not be plug and play. I had to add a wire to the remaining empty(ground) terminal and attach the other end to some empty conductive surface on my bike. Now before adding the wire to the ground teriminal on this module, my indicators wouldn't work at all. Maybe you can chalk that up to my inexperience or my lack of reading comprehension, but I think it might be worth mentioning. After doing this, the buzzer worked perfectly, but the all LEDs flashing at once issue was still there.So, in summary: Maybe get the modules which say "DC flasher" on them instead, if all you want is to perform an LED indicator conversion. And maybe get a 2 pin one if you want a plug and play experience.

The media could not be loaded. Thank you Minda , Value for money, Sound quality,Ease of installation, Waterproof,

This is not working as mentioned. No proper packaging and damaged cover. Indicators are not working with this module in my bullet 350. Waste of time and money.

Easy to install, its electronic and not older bimetallic strip type. This requires negative terminal to be connected to function. The beep is sweet and not too loud, beep is for personal awarness rather than pedestrian hearing. I installed this after upgrading my blinkers to led bulb as bimetallic strip ones won't work with LEDs. I used it in my 2011 CBZ Xtreme bike along with Simtec bulbs and hazard system. Only downside is plastic is not very sturdy so you have to fix it properly so as it doesn't rattle and bumps onto something everytime.