VEVORCommercial Ultrasonic Cleaner 6L Professional Ultrasonic Cleaner 40kHz with Digital Timer&Heater 110V Excellent Cleaning Machine for Watch Instruments Industrial Parts Excellent Cleaner Solution

Decent sized, Intuitive controls, and is very effective. I use mine for stripping models of paint and it has a good track record so far. But I’d recommend using a degreaser for removing paint from plastic or metal. It’s sturdy and comes with a nice tea leaf cage for putting smaller items in it. It is loud, not the loudest but enough to bother many in the house. Zero leakage and look the part

Got this to clean gun parts and it works great. Then cleaned some jewelry works great. The heat setting works good also. Looks like i can clean about anything that will fit in this thing.Warning use caution with cleaners they could cause surface pitting to certain metals like aluminum for example. Also can cause damage to gun painted/Cerakot finishes. I say use a very weaker detergent with distilled water. For jewelry I used Dawn soap and distilled water worked excellent. For gun parts I used 50/50 Purple Power and distilled water i should use weaker ratio mix. It did a great job but damaged some of the Cerakot finish at a 50/50 solution.. Next time I'll use a weaker mix 30/70. I did use the heat setting at 50 degrees C.If you preheat the distilled water before filling the tank then it doesn't take near as long to come up to temperature.TIP: A warning make sure you fill the tank to the top of the basket so you don't burn up the Ultrasonic transducer.TIP: I put my items with detergent mix into zip-lock freezer bag and set it into the clean distilled water, this method keeps the dirty in the bag and then there is no after clean up of the Ultrasonic ben and you use a lot less detergant also. Then you can save and re-use the distilled water in the bin for next time around. Jewelry only took 10 minutes and my gun parts took about 20 to 30 minutes to get the baked on carbon off.Great little Ultrasonic cleaner that does a really good job. I recommend it.Update 3-9-2025Gun Suppressor cleaning, 1st one HUXWRX Flow 9K TI 3D printed Titanium2nr one, Rugged Alaskan 360, Titanium and Stainless SteelI tried Purple Power at a ratio of 50/50 to clean my gun suppressors ran it for 2 30 minute cycles at 50 C. temp. it removed alot of carbon but that was it they still looked really dirty and the PurplePower messed up the Cerakot finish on the Alaskan360..Next i used a quart Mason jar and stood up my Suppressors in the jar and added CLR at ratio of 100% and placed the jar in the Ultrasonic distilled water. Ran this at 50C water temp for a 90 minute cycle. MY suppressors came out like brand new totally clean of all carbon, lead and copper fouling deposits. Looked like new again and the CLR did not harm my Cerakot finish. Excellent!!!! My suppressors had 1200 to 1500 rounds thru them each. Nothing like new titanium clean suppressors to play with again! Great Vevor Ultrasonic cleaner

I bought this to help me clean all the small and medium sized engine parts for my Mazda rotary engine rebuild. The 15L will fit one rotor on its side. It take a bit to preheat and when the ultrasonic cleaner function is on, its pretty umm, sonic. After the cycle the heater stays on so you need to go turn that off after the cleaning is done. I've used this with Super Clean and Simple Green Pro HD (the purple one, aluminum safe). The drain works fine for me and doesn't leak, although the hose kinks pretty easily.Update: the heater seems to heat to 55-60C even when I turn it down or try to turn it off. It would be nice to have actual control instead of the illusion of it.

The media could not be loaded. It seems like some of the other reviews didn't give the manual even a glance. It has all the instructions there for you to get it started.With that being said, this worked really well for jewelry and glasses. I did not realize how dirty some of our jewelry was until it came out of the ultrasonic cleaner. The glasses in the video is about the widest thing you can fit in there (~6 inches). I did not use a special cleaner solution, only water and dawn dish soap. I'm sure if you had a solution it would work the same or better.Pros:- Individual temperature and timer controls. Really let's you fine tune your options.- Stainless steel lid and enclosure, really easy to clean.- Smaller container included especially small jewelry pieces, earrings for example.Cons:- The cleaner beeps with every button press, and it is very loud. Also it beeps loudly on startup and shut off as well. It is nice to be able to hear it so you can walk away while it does it's thing.- The bowl is not removable. That means that you'll have to take the whole machine to the sink or wherever to dump the dirty water out. It is a little bit sketchy to me to be dumping water directly out from this machine with a built in power supply. Feels like a bad idea but should be fine as long as you're not submerging it in water.