Adam's PolishesAdvanced Graphene Ceramic Coating - 10H Graphene Coating for Auto Detailing, 9+ Years of Car Protection & Patented UV Technology

All I can say is wow. take your time and prep your car/truck so far water bead is like nothing I have seen before. Wasnt to hard to apply but i a clay and iron wash before I applied this. Did the first wash and it was supper easy to clean. Pricy but if it last like it says and you do your weekly washing and so on. I will post in again in a month.

The media could not be loaded. I was always scared to try ceramic because of how difficult it can be to mess up. I gotta say this was not difficult. Labor intensive? Very. Difficult? No.This is a solid weekend project. My flow was wash>iron removal>synthetic clay>polish>strip wash>surface prep>ceramic. I had already done a two stage correction when I got it, but since then I've only used waxes and sealants. The polishing brought it back and got out all the new swirls.As far as the graphene, I watched the Adam's livestream of how to use their advanced graphene and it taught me a lot. I applied it, waited for the rainbow to dissipate, and waited for it to sweat. Then I used the suede towel, which felt grabby on the surface as they described in the video to level it out. Then I used the white towel to buff it off. The coating itself only took about 3 hours to do the painted surfaces. I applied in a crosshatch pattern in smaller sections along the body lines to ensure it wasn't sitting for too short or too long, because my environment was uncomfortably hot and humid which decreased the cure time. The UV part was pretty useless on my car. Maybe more helpful on a lighter shade.Ignoring the prep, I give the actual application of the product a 7/10 on the easiness scale. It really wasn't hard.It definitely gives the car a very high gloss. It is incredibly shiny. It's not deep like a carnauba wax though.If you're willing to give up the better part of a weekend, you can have a coating that will last years and save thousands DIYing it.It should be noted that per their videos, you can use this stuff on many things. Any exterior surface of the car, glass cook tops, shower doors... You name it. I used exactly one bottle on an Audi Q7 and S5, covering both exteriors completely minus the wheels. Keep in mind that the applicators and towels are one time use. They'll get crusty when the ceramic dries. So if you wanna do multiple coats or different things on different days, have some extra applicators and towels ready. Also, once you open the bottle it will start curing, so close it in between panels and use it promptly.Update: Washed it for the first time and the hydrophobicity is amazing. I completely dried the car towel free with only a small battery powered blower, the kind you would use to blow sawdust off a workbench or something. If I had a real leaf blower I could probably dry this thing in less than a minute.3 month update: Hydrophobicity is minimally degraded. I'll use a synthetic clay mitt to bring it back. Car still easily dries with a blower. Also want to add you may find some information on the internet saying you don't need to level the coating on plastic, like the gray stuff on bumpers. You absolutely must level and remove the coating just like on paint or glass or you will get white streaks that are essentially impossible to remove. I used it on the plastic rockers on the S5 and the entire grille of the Q7, which has a ton of gray plastic. I thoroughly cleaned and surface prepped, and then applied the ceramic in the same manner as the rest of the car, although deciding when to level and remove it is a guessing game because it won't rainbow or sweat. It deepened the color and restored it to how it looked new. No more chalky, oxidized plastic trim!One year update: This stuff is still going strong. Water beading is still outstanding, I can still dry the car completely with a leaf blower, and the shine is immaculate. I have not touched up the coating at all except for a handful of applications of Adam's graphene detail spray. I never used a clay mitt on it as I said I would, and apparently that's not good for the coating anyway so I'm glad I didn't. Thoroughly impressed with how it has held up after a year. I would not hesitate to use this again, but apparently I don't need to. I went ahead and finally did my brake calipers and wheels, and wow. The brake dust just rinses right off. It's amazing. I really don't even need to touch them.

I have nothing but good things to say about this product. I placed this over my existing ceramic coating and it worked perfectly. The color is a bit deeper and has a much better look. I also coated my glass shower door also. The outcome is prefect.

I don't know about longevity, as I've only washed once after application. It takes a little elbow grease to apply, but the results are amazing.

Purchased this kit after researching many different options online to apply to a 2025 Hyundai Elantra N. Box arrived opened and was missing the instructions so I had to rely on watching multiple videos Adams website and youtube due to in being a holiday weekend when applying the product. Overall if you are using this kit I highly recommend ordering a larger bottle of the paint prep spray and the graphite booster. The bottle provided just enough to clean the body of a small sedan and will not last for any bigger of a vehicle. If you are using this kit on a lighter colored vehicle (mine is white) make sure to get the uv version so you can see where the product is applied and can correct the high spots during application before it cures. On darker paints you can physically see the coating start to sweat so its not really needed. The application process is easy enough and once flashed to the paint the coating comes off easy and is not sticky. One of Adams install videos suggested you can use the Graphene booster spray to rehydrate the actual ceramic sealant if it has started to cure too long on the paint to make it easier to remove a high spot. I did however use a chemical guys microfiber to buff the thick oil off since its a coarser microfiber and followed up with the Adams plush microfibers provided which is the way to go otherwise you may be buffing by hand a while longer if just using the ones provided in this kit. I will follow-up after some time in the elements and after some washes to verify the protection offered.