Osmo TopOil - High Solid Worktop Oil 3028, Clear Satin, 500ml - Food Safe Wood Oil for Wooden Kitchen Surfaces, Chopping Boards, & Furniture Joints - Water-Resistant Wood Treatment & Durable Finish

One word.... Brilliant!I trawled thru a lot of similar products and just glad I chose this one.I was able to remove old varnish on my kitchen worktops with a flat edged tool similar to what you would use your remove old wallpaper.Didn't find sanding blocks useful!It goes on smoothly and evenly and goes a long way.It doesn't have a heavy smell like other oil/varnish productsGave a glorious shine on my wooden kitchen work surfaces.When I spilt water on the wood a few days later, it just sat on the surface of the wood and didnt soak into it.Applied three coats to each section.Did one section at a time to maximise remaining worktop space usageProb about a day and a half to dry, depending on room temperatureYou won't go wrong using this,

Excellent quality product goes on easily and covers well

Painter used this oil on my media wall the wood looks amazing.

Well it is quite fumey, if that’s a word, for quite a time. Expensive but does a good job and goes on easily. Needs a rub down between coats

Put 3 coats on wooden worktop. Looks great and water proofed although may need to maintain surface with more coats

Very aromatic so need good ventilation.Once you get used to how to apply it gives good finish, ignore directions for applying with cloth, this didn't give good finish, we found a brush best and not the one recommended. Slightly higher gloss than expected for a satin finish but our work surfaces look significantly better, almost like new.Difficult to clean brush, we used white spirit.

Brings the grain up lovely. Apply thin coats and rub down with 400grit between coats. It does need *at least* 8 hours between coats or it will clog up the sandpaper. Picture is of an oak staves worktop treated/untreated. A little goes a long way. Multiple coats on 2m wide x 720mm deep worktop (both sides) only used just over half of the tin.

I checked the photos and apparently the colour should look clear not white when you open the bottle. I just lightly sanded and applied it twice. Waited more than a day between each application to dry out completely. Very easy to use and didn’t change the colour of my bar. Recommend