Gate Frame Fence Kit With Gate Latch, Anti-Sag Corner Brace Bracket Hardware Kit With Hinges

Sturdy, looks good, it functions well, no problem with rust and I assembled it on a concrete slab. Best though if you have a piece of plywood or a table. 🤨.Pre drilling is important, I used a self centering hinge bit first followed up by a regular bit for the longer screws. (Shorter screws do okay with just the centering bit). I had no issues with the screws when pre drilling.As long as your boards are straight and flat, it is easy to use.Used this for a chicken run I built. Keeps the corners square and secure. Plus a fast build, as long as your boards aren’t warped or twisted or BOTH😖.

Excellent! Easy to assemble and very solid. Read the reviews about the poor quality screws that are supplied and used deck screws instead. Worked great. Highly recommend.

I built two wooden gates, and these worked out great. Be aware of the screws that are given will break while screwing into wood. I ended up using my own screws that are better quality. Other than that, the gates have not been sagging since I put together about six months ago.

Very sturdy. Easy to use a quick way to build a nice gate

These corner structural supports with attached/welded hinges are truly a game changer. Easy to install. (I upgrade to deck screws), but other than that - excellent product. Have used on two gates.

Great product money's worth if you realy need them I return it back i did not use them I had a contractor install two new gates that I needed done asap so that's why I did not use them but I did get to see the quality and they are made very well if I would need to use them I would order them ones again can't go wrong great product

I’ve build a lot of gates in my life. A few years ago, I was finally convinced to buy a gate kit. Holy cow! Game changer!! Used several of them since then.I bought this one because of the price. It’s a bit of a different design than I’ve used before with the integral hinges and it’s great. From the first cut of a board to completed installation was less than 30 minutes. If you’ve never built a gate, this couldn’t make it any easier and you’ll have a no sag, professional gate with only a few straight cuts on lumber.Only watch out: the provided screws are cheap: heads will strip out and they’re too fine of a thread. I used some black decking screws.Would buy this again in a minute.

This is exactly the product that I needed for my job of building two mid-weight gates to separate two parts of the property. I wanted a pair of gates with a simple 2x4 frame and welded wire mesh to cover them. The design of these is just about perfect.The angle braces are square and solid, nicely coated and a good size - large enough for this job. The hinges are especially good, pre welded to a second pair of angles for the outside two corners. These provide a great structural reinforcement and make all the difference. The included gate latches are standard and effective.Here's the rub:The kit included plenty of screws to tie it all together. Unfortunately, the strength of the screws I received is completely unacceptable. Pre-drilling my holes, they were still far to weak to install with a standard 20v impact driver - I snapped off a few screw heads before realizing how inferior they really are. And they are also unsuitable for screwing in completely by hand. I ended up getting the inner hardware attached with their screws by pre drilling larger holes, using the 20v to drive them in 90%< then hand tightening the rear. What a pain!!Then for all the exterior and hinge hardware installation, I used my own heavy duty deck screws, not color-matched (black) but they also won't fail.Knowing all that, would I get these again? Actually yes, the frame hardware is great, but budgeting in the fact that you really need to add your own screws to the package. Consider yourself alerted.