AC InfinityCLOUDFORGE T3, Plant Humidifier 4.5L with VPD Humidity Controls, 10-Level Precision Vaporizer, Extendable Targeting Hose and No-Leak Seal for Grow Tents

This review is for the AC Infinity CLOUDFORGE T7 Plant Humidifier for Grow Tents, 15L, VPD Humidity Controls, 10-Level Precision Vaporizer, Extendable Hose, Targeting Pipe, No-Leak SealI am so excited to write this review. Almost as excited as when a saw this humidifier work for the first time. I have a 10ft x 10ft greenhouse. It is very important that during the winter I keep it at a temp between 65 degrees - 70 degrees F It requires two milkhouse heaters to maintain that temp differential. As the weather gets colder, they run more. As they run, they dry out the greenhouse. My previous humidifier was an evaporation version. It worked really hard to keep up with the heaters. Then I found this humidifier. WOW! This humidifier works much better than five of the other one. In the description its name is CLOUD FORCE. That is exactly what you get. It comes with several different attachments, but the one I use sends the water vapors up about 2ft above the humidifier and then has a 5 hole distributor on top to send the water vapor in 5 different directions. When it is going full blast, it creates a cloud of vapor in my greenhouse where visibility is almost zero. I have the controls set at full blast because I have it plugged into my greenhouse humidistat that monitors the humidity and turns the humidifier on and off as needed. I am so happy the humidifier remembers its settings even when its power is cut off. As I said earlier, my old humidifier had to struggle getting the humidity to an acceptable level. This new one can change the humidity in the greenhouse from 20% to 80% in a matter of minutes. I have a monitor in the room that graphs temp and humidity as well as other parameters. The humidity graph when I turn on the humidifier has a very sharp vertical spike as the humidity raises. Then when it is on auto mode with my humidistat, I get a zigzag pattern as the unit is turned off and on the maintain humidity between 65% and 70%. As long as I can keep it filled with water, the humidifier has no problem maintaining the humidity levels. I am using distilled water to run the device because it cuts down on deposits from the water. This device can pump out 4 gallons of water easily in a day. I was going to go broke buying distilled water, so I bought a distiller to make my own. That is working out great. When the device runs out of water, it turns off the vapor making and just flashes the screen to let you know it needs to be filled.The other day I heard a noise which sounded like it came from the bottom of the humidifier. I could not be sure if it was the humidifier or one of the heaters. It sounded like a bad bearing in a fan motor like older computers make when their fan is going out. I immediately contacted AC Infinity to report a possible problem with the device. They responded the next day with an offer to replace the unit. I told them that I wanted to research whether the problem was with their device or my heater. The problem is that testing each device has not demonstrated the problem again. So, I can't yet tell which one it is. They told me to keep monitoring the problem and if it occurred again and it is the unit, they would replace it. That is exceptional customer service. I said I was excited to write this review because this is truly an amazing device and customer service is great. What more could you ask for. I can will try to post some pictures, but will depend on how well my phone cooperates with the Amazon review feature. I will try to show the humidifier creating its cloud and also the graph of how steady this humidifier functions when it has water. The spikes that go down quickly are where the humidifier runs out of water. I easily give this device and the company 5 stars.

Works well takes a bit to figure out the settings. Basically u press the settings button to scroll thru the menu and the arrows to adjust your presets. The on and off display is your low and high limit settings. Ex: rh at 60% and adjust the leniency to how u need it. I like it at 0 so it kicks on and off right at 60. U can change all those details easily. The sensor reads well. The tank holds almost 1 gallon of water exactly. Ez fill a gal. And pour it right in the reservoir tank. The little hose it comes with is pretty rough. Its directions say to route the hose into the top of your grow tent to avoid pooling water inside the hose and preventing the air to flow. I use an exhaust at the top of mine so that didnt work. It caused all the humidity to be pulled out and could not build up to the desired level. My solution: put a second intake at the top of humidifier where it comes out and route into bottom of tent. Worked like a charm.

Ill start by saying I am NOT using this with a controller that manages the unit with lights, fans, wifi, etc. I just needed to be able to provide consistent humidity above 60% to my grow tent. This unit does that easily but as someone who is tech savy, it took me a few days to figure out all the settings and stop over thinking it. Luckily, I got connected to someone also using it and they simplified it for me. In the end, I just use the auto-setting and set my humidity. I fill it up once a week and let it do its thing.Now, if you need more than that, the machine does it, I just cant speak to best practices for the other settings. You will see items like kPa, VPD, leaf offset, etc... I think those are auto settings that are different parameters for it to follow instead of solely focusing on humidity. Again, all I do is change the humidity production level in the on mode and then adjust the auto mode to the humidity I want. kPa is basically a measure of pressure, VPD refers to home much moisture the air can hold (kinda related to dew point), leaf offset from what I can tell is the temp of your plants leaves compared to the ambient temp, etc. The unit has features, I just didnt need them. But being able to set it and forget it was what I needed and even at this price point, there are few competitors.

This is a good humidifier and I like how I can control it with my controller. It seems to put out a good amount of moisture without burning through water. At first I thought I would have to refill it daily but it wont.The only downside is that it does drip a lot into my tent and creates a puddle. Granted its been pumping pretty hard the last day but its still an annoyance. And I have it rigged the way they explain in the directions.

I struggled with looking for the perfect product to stabilize the humidity level of my iguanas tank. I was contemplated with this product because there weren’t many reviews regarding reptile tanks. At least I didn’t see any that help confirm for me that it would work so please allow me to be the first if I’m not my apologies this product has saved my iguana’s life. I received him from a reptile store where they were not taking care of their reptiles, but I wanted a green iguana, so I saved this one’s life. I was struggling to stabilize his humidity level and his digestive system was suffering. I’ve had this product running for about a week now his green has gotten brighter. He’s more active and his digestive system is back on track. This product is great. It keeps stable. You don’t have to worry about continuously running to check the humidity level sometimes it may go a few notches over what I desire, but not so high where I need to worry it balances out at the end awesome awesome product going to be buying another one for my bearded dragon!!