Gisafai 20 Pcs Misting Nozzles Include 1/4" Water Misting Nozzle Tees, 6mm Brass Nozzles 1/4" Connect Fitting Air Hose Sprayer for Outdoor Spray Cooling System(Two Section)

I really like the versatility of this product.You can use the connectors anyway you want and slide in a sprayer where you like. If the sprayer clogs, push down the sleeve and install a new sprayer head. Very easy to use for all applications.

Great

Have tried 3 different types of hose and all of these fittings still leak. Was a complete waste of hose and time

I built a pretty complex micro irrigation system last season and there was a lot of trial and error involved.One major mistake I made early on was using barbed emitters and connectors. I had quite a few components set up using those and found them to be absolutely awful: A pain in the neck to connect, and especially, to connect so they'd stay in place. I would never recommend any brand of barbed fittings for micro systems: Unfortunately, that's what most big box store garden centers carry.I replaced everything with what are sometimes called "quick connect" fittings, which is what these are. You simply insert the micro line (or emitter) into the connector and should hear it click. To remove, you just press on the blue ring toward the silver collar and gently pull.This set gives you 10 quick connect "tees," plus 10 misting emitters. The connectors fit 1/4" micro tubing perfectly and the beauty of quick connect fittings is the ability to move components around as needed. The connections that go in opposite direction are for your micro line. The connection that's perpendicular is for the emitter.The emitters (which the manufacturer calls "nozzles") are made of metal: they're listed as being made of brass. Since they're silver in color, it's likely that they have lower copper content and higher zinc content, which makes them harder, which is appropriate for this application. Brass that's softer might not be as durable.The emitters are easily adjusted and work as expected.This is a good set that can be incorporated into any micro irrigation system: Highly recommended.

If you want to exist outside where I live during the summer, you need 2 things: shade and a mister system. These are the main part of that system. You also need 1/4" tubing and parts to connect to the water supply. Make sure your water connection is filtered: A tiny speck of dirt will plug a mister nozzle.

I have 1/4" tubing, not 6mm tubing. My tubing does NOT connect properly to the tees. The nozzles have a 6mm shaft, so they fit in the 1/4" push connectors, but may not seal properly. I was able to force my 1/4" tubing into the 6mm connectors, but there is no getting them apart ever again.At 60-75psi the nozzles do produce a very fine mist, the angle of the mist is pretty narrow, maybe 15-20 degrees, the flow rate is pretty low as well. I was replacing nozzles that sprayed a much wider angle, so I don't know if these will work for my application.

We used this system and have a screen filter on end of hose adapter. To filter out debris. Nozzles clogged within two week. We purchased a different brand and they are working good for the past several weeks.

Leaking all over doesn’t spray just shoots a streem